2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Cranking issue and strange shimmy?

Thread Tools
 
Search this Thread
 
Old 02-07-10 | 01:08 AM
  #1  
batmanfc's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2008
Posts: 506
Likes: 0
From: Virginia
Cranking issue and strange shimmy?

I but an '89 TII motor in my car. The cold start and emissons have been removed but I don't think that is what is causing the cranking problem. Everytime I crank the car it floods and it won't actually stay idleing until the 6th or 7th time I try to crank it. When I first start cranking it, the car just idles up and dies. Finally when I can get it to idle, I have to give it gas but I can't just hold the throttle. When I hold the throttle at a steady rpm, the car just backfires and tries to die, so I have to just tap the throttle. Once I have done that for 30 seconds or so the car will idle on its own but high around 1500 rpm. I can watch the boost gauge and everytime I hold the throttle and it comes out of vacuum is when it backfires. Also, in 4th and 5th gear under about 2500 rpm the car seems to shimmy and the boost gauge actually flutters. I' m not sure what can cause this. It only does it in those 2 gears and once above those rpms it doesnt do it any longer. Maybe a little help? I have tried to think of everything.
Old 02-13-10 | 11:14 PM
  #2  
batmanfc's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2008
Posts: 506
Likes: 0
From: Virginia
Here is the video of how the car acts when finally cranked but still will not idle on its own.
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/5JKcxqxg6gk&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/5JKcxqxg6gk&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ZacMan
Build Threads
4
09-19-15 09:20 PM
sherff
Adaptronic Engine Mgmt - AUS
5
09-12-15 12:22 PM
Monsterbox
Adaptronic Engine Mgmt - AUS
5
09-11-15 03:29 PM
Steven_McKinley
General Rotary Tech Support
12
09-05-15 10:48 AM



Quick Reply: Cranking issue and strange shimmy?



All times are GMT -5. The time now is 02:27 PM.