rx-7fc

87racer i am from the bay area

astrochild7

iTrader: (3)

i have a 3" TID like the small rubber one... do you think it 'll work or is this only n/a. if so i'll buy one tomarrow. hate to be picky but i want to see a picture with the corner and turbo plumbing and further away from car......

rx-7fc

astrochild7 it should work with turbo and do you have of how your set up is

rx-7fc

rx-7fc

does any body want one because i have to make them

88 vert

i want a CF one badly but i dont think my filter will fit i need it further back(bigger box)how big is your filter?

rx-7fc

88 vert mine is about 7in and it should fit about 9in but you can move the box more back and i can make one a little biger for you

bingoboy

any idea where the neck of the air filter connects on the S4 vs the S5? it seems to be several inches further back on the S5 than on the S4 in your pictures. if so then the box would need to be mounted further back and that would require a different shape to it.

Psychoblue23

which one u guys like better.. i liek tha aluminem one.....

Psychoblue23

The guy who has this one has a post in the 2nd gen section, he will send you the template to make thisone for 5 bux us and 8 bux can. I am goin wth the aluminum one, looks so much better.

- James

Pinfield357

hey rx7_fc how is it attached? does it just sit there? what year and make is your car? i dont think it would work with the TID

bingoboy

good luck on getting it to look like his does unless you have time and patience. i used the aluminum design (but with steel and a good coat of paint) to put in a box without the lid and used weatherstripping to seal it to the hood. it's not the prettiest thing without the lid, and also you have to remember the cost of parts to get it as well.

rx-7fc

Pinfield357 it bolts down with some mounts that screw on where you take off the stock air box and what is a tid i just want to make sure

rx-7fc

bingoboy it should work just mine was not mounted yet and it moves a little more back but it is for 86-92 so it should work

RotaryWeaponSE7EN

iTrader: (6)

I'll take one in about a two weeks

bingoboy

wonder if it will work with my apexi intake filter setup..its got all kinds of brackets and stuff

88 vert

hey RX7-fc if you could make me one about 2 inches bigger that would be great ill make it worth you while.How long does it take you to make them and when do you think you could one have shipped out to me,O and how do i pay???

EProdRx7

here's mine. It feeds through a hole cut in front but the top could be left off for top feeding. Have since remade it in carbon but don't have pics. Might be convinced to make another if the price is right. Would definatly be $100+ closer to $200. Parts are vac formed and have quick release fasteners on top.
http://tnoms.thenyceone.com:9999/john/101-0108_IMG.JPG

rx-7fc

88 vert i can make one a little bigger just let me know

88 vert

i sent you a pm RX-7fc i can take measurements for you if that would help.but i htink just like 2-3 inches bigger would be fine.

rx-7fc

88 vert just measure it to make sure

Pinfield357

TID=Turbo Inlet Duct

Guy

I also would like one, but I have the apex intake. Do you know if the opening around the AFM is big enough to surround the brackets from the apex intake?

rx-7fc

1987RX7guy when do you want yours
Guy about how big is your air filter in inches and would that be a s5

Guy

Yes it's an s5. I'll have to say anywhere between 4 and 5 inches would be a safe bet.