Coked Engine?
#26
Sharp Claws
iTrader: (30)
When I first got my koyo rad I drive around for a week w/ no fan at all! As long as I wasnt sitting still temp was between 1/4 (proper stock position) and 1/3 ....and that was on a T2.
Certainly sounds like a fan issue, if you are looking into efans check out the mercury villager/nissan quest fan. Its got a great shroud, draws less amps than the taurus (although I would upgrade from the shitty s4 alt before any efan swap) and blows like a tornado even on the low speed (like -10° in 10 sec)
Certainly sounds like a fan issue, if you are looking into efans check out the mercury villager/nissan quest fan. Its got a great shroud, draws less amps than the taurus (although I would upgrade from the shitty s4 alt before any efan swap) and blows like a tornado even on the low speed (like -10° in 10 sec)
#28
My **** keeps breaking.
Thread Starter
iTrader: (2)
Join Date: Jul 2005
Location: Columbia, Maryland
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
yea, in cool climate driving the FDs i notice the fans almost never come on unless you're in boost. however they don't turn on until 97*C. but generally if you're moving and everything in the system is copasetic they don't need much cooling unless you have a monster turbo on the car and a fairly aggressive tune.
#29
Shredding Tires
iTrader: (25)
I have hayden 16" fan for sale, op can pm me if he wants. I also have stock fan and shroud.
I used a Hayden 16" single speed fan. You can get one from any parts store. 2 speed is overrated.
This is how I made the fan shroud:
https://www.rx7club.com/2nd-gen-archive-72/diy-electric-fan-shroud-808292/
This is how I made the fan shroud:
https://www.rx7club.com/2nd-gen-archive-72/diy-electric-fan-shroud-808292/
#30
FC guy
iTrader: (8)
nothing is keeping him from coming back that i know of.
just because someone opts not to or doesn't care to defend themself doesn't mean that it can't be brought up, that's just a rediculous point of view... should i hypothetically go and rip off a bunch of people and then leave the forum? i guess it shouldn't be discussed afterwards because i don't come back to defend myself? that's straight up ignorant.
who's to say he won't try and come back and rip on me? then again i'll simply post pictures of that FD engine with welded exhaust port sleeves, i simply don't know how he can defend that one. chunks of metal going through the turbos generally isn't good for them. it was lazy and cheap, too cheap.
just because someone opts not to or doesn't care to defend themself doesn't mean that it can't be brought up, that's just a rediculous point of view... should i hypothetically go and rip off a bunch of people and then leave the forum? i guess it shouldn't be discussed afterwards because i don't come back to defend myself? that's straight up ignorant.
who's to say he won't try and come back and rip on me? then again i'll simply post pictures of that FD engine with welded exhaust port sleeves, i simply don't know how he can defend that one. chunks of metal going through the turbos generally isn't good for them. it was lazy and cheap, too cheap.
One day one of your old customers might go online somewhere and spread false information or not provide the whole story . Not saying this is the case with that FD engine im just saying its not cool to talk **** about the guy and I have no allegiance to him whatsoever
#31
My **** keeps breaking.
Thread Starter
iTrader: (2)
Join Date: Jul 2005
Location: Columbia, Maryland
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Hi guys -
Just providing an update. I ended up bypassing the heater core entirely (until I find the time to remove it and clean it properly) by looping the line.
No leaks, so that's good. However, it's still getting a bit hotter than I'd like. Highway driving cools it down a bit, but not to an acceptable level.
Included is a picture of what the heat gauge read after a bit of driving (and red lights). Also included is a video of how much the clutch fan moves after the engine is warm (do I need to replace it?)
http://junk.bryonisawesome.com/heat_pic.jpg
http://junk.bryonisawesome.com/clutch_fan.m4v
Just providing an update. I ended up bypassing the heater core entirely (until I find the time to remove it and clean it properly) by looping the line.
No leaks, so that's good. However, it's still getting a bit hotter than I'd like. Highway driving cools it down a bit, but not to an acceptable level.
Included is a picture of what the heat gauge read after a bit of driving (and red lights). Also included is a video of how much the clutch fan moves after the engine is warm (do I need to replace it?)
http://junk.bryonisawesome.com/heat_pic.jpg
http://junk.bryonisawesome.com/clutch_fan.m4v
#32
Rotary $ > AMG $
iTrader: (7)
nothing is keeping him from coming back that i know of.
just because someone opts not to or doesn't care to defend themself doesn't mean that it can't be brought up, that's just a rediculous point of view... should i hypothetically go and rip off a bunch of people and then leave the forum? i guess it shouldn't be discussed afterwards because i don't come back to defend myself? that's straight up ignorant.
who's to say he won't try and come back and rip on me? then again i'll simply post pictures of that FD engine with welded exhaust port sleeves, i simply don't know how he can defend that one. chunks of metal going through the turbos generally isn't good for them. it was lazy and cheap, too cheap.
just because someone opts not to or doesn't care to defend themself doesn't mean that it can't be brought up, that's just a rediculous point of view... should i hypothetically go and rip off a bunch of people and then leave the forum? i guess it shouldn't be discussed afterwards because i don't come back to defend myself? that's straight up ignorant.
who's to say he won't try and come back and rip on me? then again i'll simply post pictures of that FD engine with welded exhaust port sleeves, i simply don't know how he can defend that one. chunks of metal going through the turbos generally isn't good for them. it was lazy and cheap, too cheap.
Maybe you should clarify...just so no one misunderstands.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM