coil over shocks and 3rd gen wheels
01-30-02, 10:16 PM
#1
coil over shocks and 3rd gen wheels
Will a coilover kit allow you to use stock 3rd gen wheels on the front of an FC? I have a set of wheels already but I need spacers to run on the front. They cost a pretty penny and then they hit on the fenders under hard cornering. A GC coilover kit is $400 and since I would like to have coilovers anyhow I was wondering if this would allow me to use the wheels as well.
Thanks
Thanks
01-30-02, 10:27 PM
#3
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
the coil over kit won't gain you very much space. the stonk springs are very small at the bottom already.
Last edited by Scott 89t2; 01-30-02 at 10:30 PM.
01-30-02, 10:35 PM
#4
I guess I'll just have to check again and see where exactly they hit. I don't remember. I thought it was on the higher part of the spring where it bows out...I just don't remember. Anyone else have a suggestion.
The coil over kit is Ground Control and ONLY includes perches and springs...you need to find a set of shocks at aditional price. That does not even include a camber plate which is another $250 or so.
Greg
The coil over kit is Ground Control and ONLY includes perches and springs...you need to find a set of shocks at aditional price. That does not even include a camber plate which is another $250 or so.
Greg
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM
