clogged injectors
#1
Full Member
Thread Starter
Join Date: Jan 2002
Location: valencia
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
clogged injectors
ok, ran the car out of gas , never started (and idled) afterwords..... so, what happened here? with a fuel cut switch i can make it run till 650(really ruff though), so, i am letting it sit, can i clean and test my injectors my self?????? does any one know where i can get really cheap injectors???????
#4
Rotary Freak
Did you prime the injectors?
There is a connector to do this on the psgr fender well.
88-91 is a yellow two connector thingy that you have to short the two together.
I think that older versions just have 1 connector that you ground.
either way, if you turn the key in the run mode, then connect the prime connector to the right place, you should hear gas flowing.
after the whooshing and whining sounds are gone, you should be able to start (or flood start) the car.
There is a connector to do this on the psgr fender well.
88-91 is a yellow two connector thingy that you have to short the two together.
I think that older versions just have 1 connector that you ground.
either way, if you turn the key in the run mode, then connect the prime connector to the right place, you should hear gas flowing.
after the whooshing and whining sounds are gone, you should be able to start (or flood start) the car.
#5
Full Member
Thread Starter
Join Date: Jan 2002
Location: valencia
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
they don't really stop priming, after the whirring sound, i can still hear fuel moving, like maybe through a inject stuck open??????, and i just pulled out my dipstick.............., i thinking my oil is more gas than oil ....... ........, damit
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM