Can I use an S5 NA pri. fuel rail on S4 turbo?
09-02-08, 12:04 AM
#1
Now With 10th AE Fun!
Thread Starter
iTrader: (1)
Join Date: Jun 2005
Location: CA
Posts: 1,869
Likes: 0
Received 0 Likes
on
0 Posts
Can I use an S5 NA pri. fuel rail on S4 turbo?
Can I use the primary fuel rail off of an S5 NA in place of the stock S4 primary fuel rail? I mocked it up and it looks like it would fit. I would like to eliminate the faulty PD on the S4 rail without using a banjo bolt. Thanks.
09-02-08, 12:39 AM
#2
It's a matter of clearing the UIM when bolted down. I compared the two at one time, and they seemed to be around the same overall height. The S5 NA UIM comes down very low, so it should be fine with turbo manifolds.
Last edited by RotaryRocket88; 09-02-08 at 12:43 AM.
09-02-08, 12:51 AM
#3
Back at it again!!
iTrader: (3)
Join Date: Jun 2003
Location: Western Colorado
Posts: 1,324
Likes: 0
Received 0 Likes
on
0 Posts
make sure you connect it the right way, as the pulsation dampener will be reversed. So, make sure you connect the secondary rail up correctly to the primary rail
09-02-08, 01:00 AM
#4
Now With 10th AE Fun!
Thread Starter
iTrader: (1)
Join Date: Jun 2005
Location: CA
Posts: 1,869
Likes: 0
Received 0 Likes
on
0 Posts
Good point 2lucky2tha7. I searched for any info on this and didn't find anything. It seems like too easy of a fix for the problem to me. Anyone else done this or see why it wouldn't work?
