12AllWays

iTrader: (20)

http://cgi.ebay.com/ebaymotors/Eibac...Q5fAccessories

Any thoughts or opinions?

K-Tune

iTrader: (26)

uhh...you aren't looking at the right part man.

12AllWays

iTrader: (20)

So what is this^^ I thought it looked odd...

RotaryEvolution

iTrader: (30)

it's a tool to check camber, not a part to adjust camber.

ColinShark

Epic.

Roen

iTrader: (2)

Fail.

Hypertek

iTrader: (3)

what you want for the rear is one of these
http://cgi.ebay.com/ebaymotors/86-87...item5885cd0838

a few of us have them, no complaints.

For the front, you can try those camber bolts but i never had experience with them. *Should be easy to install*
http://cgi.ebay.com/ebaymotors/86-89...item48366adfc8

Or you can go with camber plates *More serious to install * http://cgi.ebay.com/ebaymotors/HKS-R...item2eaa7b03dd

http://www.awrracing.com/pages/rx/rxsusp.html they got some trick stuff too, like theREAR CONTROL ARM CAMBER ADJUSTER, but ive heard these bind and can break, as some forum members have experienced if i recall.

LargeOrangeFont

iTrader: (7)

Cmaber bolts wont get you any negative camber up front. You will need to spring for the camber plates.

Roen

iTrader: (2)

Camber bolts will give you a little bit of adjustment, but they are prone to slippage as time passes.

Coilovers and camber plates for the front are the way to go.

RotaryEvolution

iTrader: (30)

you can get camber plates for under a hundred bucks.

therotaryrocket

where can you get camber plates for under a hundred bucks?

also, strange how the description of the part that the OP linked even says that it allows +/- .75* of camber adjustment if it's just a tool to read camber, how the hell do you use that? I never could imagine where the hell it would install.

and the rear camber link that hypertech listed is good unless you have solid bushings/mounts in the back. at least thats what I thought I remember reading?