CAI question
11-15-05, 10:32 PM
#1
Full Member
Thread Starter
Join Date: Mar 2005
Location: British Columbia
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
CAI question
ok so i'm taking out the washer fluid canister and the air pump silencer. first question i still want winshield wiper fluid. and i am planning on using the white canister that is by the cruise control...the one that has the AWS fluid in it. the question is how do i wire it in so it will work with the switch and the trouble light wont be on...2nd question when i remove the air pump silencer should i just take the whole tube out and cap it off or put a filter on it or something?
11-15-05, 10:51 PM
#2
Rotary ≥* Soul
Join Date: Dec 2003
Location: Oregon
Posts: 785
Likes: 0
Received 0 Likes
on
0 Posts
If you unplug your fluid light sensor it will no longer light up.
No need for a filter or anything
And the pump on the cold start tank is WAY to small to ever shoot enough fluid on you windsheild.
If you must do it just use the wires from the washer fluid tank as well as the pump from it too. Thats the only way it will flow enough fluid.
No need for a filter or anything
And the pump on the cold start tank is WAY to small to ever shoot enough fluid on you windsheild.
If you must do it just use the wires from the washer fluid tank as well as the pump from it too. Thats the only way it will flow enough fluid.
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM