Built a new cold air box, observations (and pics!)
#26
Banned. I got OWNED!!!
Originally Posted by rotorforce
Interesting work and very clean engine bay...Thumbs up.
Serious question: What are the benefits of having the air filter blocked off from the rest of the engine bay?
Looks like you used aluminum, while it has a great heat disbursment, it looks thin enough where it will always absorb engine bay heat and transfer it into the boxed off area. Maybe I am looking to far into this!
Serious question: What are the benefits of having the air filter blocked off from the rest of the engine bay?
Looks like you used aluminum, while it has a great heat disbursment, it looks thin enough where it will always absorb engine bay heat and transfer it into the boxed off area. Maybe I am looking to far into this!
The stock airbox or a open filter will absorb the heat from the engine bay and cause the air to be thinner and less effective. Especially if you look at the stock setup, it runs from one side of the engine bay to the other and is made of cheap plastic...
Using a box around the filter (and tubing from the wheel area) insulates the filter from the engine bay heat.
His setup isn't a complete insultation due to the material, but it is effective. Obviously, it isn't as effective as other material, but it is ALOT better than just an open filter.
Related idea: would putting some kind of foam on the inside provide enough extra insulation to make it worth it? [And no, I'm not referring to putting it on the top edges because that should be done anyways to create a good seal.]
Last edited by DerangedHermit; 04-07-06 at 11:19 AM.
#29
XBL** Ownicus
Thread Starter
iTrader: (2)
Join Date: Mar 2004
Location: St. Paul, Minnnesota
Posts: 1,529
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DerangedHermit
Cold air is denser and improves your performance. Think of what a turbo does... shove more air in. Obviouslly it isn't near as effective, but I'm just getting across the general concept.
The stock airbox or a open filter will absorb the heat from the engine bay and cause the air to be thinner and less effective. Especially if you look at the stock setup, it runs from one side of the engine bay to the other and is made of cheap plastic...
Using a box around the filter (and tubing from the wheel area) insulates the filter from the engine bay heat.
His setup isn't a complete insultation due to the material, but it is effective. Obviously, it isn't as effective as other material, but it is ALOT better than just an open filter.
Related idea: would putting some kind of foam on the inside provide enough extra insulation to make it worth it? [And no, I'm not referring to putting it on the top edges because that should be done anyways to create a good seal.]
The stock airbox or a open filter will absorb the heat from the engine bay and cause the air to be thinner and less effective. Especially if you look at the stock setup, it runs from one side of the engine bay to the other and is made of cheap plastic...
Using a box around the filter (and tubing from the wheel area) insulates the filter from the engine bay heat.
His setup isn't a complete insultation due to the material, but it is effective. Obviously, it isn't as effective as other material, but it is ALOT better than just an open filter.
Related idea: would putting some kind of foam on the inside provide enough extra insulation to make it worth it? [And no, I'm not referring to putting it on the top edges because that should be done anyways to create a good seal.]
#31
XBL** Ownicus
Thread Starter
iTrader: (2)
Join Date: Mar 2004
Location: St. Paul, Minnnesota
Posts: 1,529
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RotaryJun
Dude, that is one B-E-A-UTIFUL FC. Great work.
#32
Banned. I got OWNED!!!
Originally Posted by uRizen
I've been thinking of using a thin layer of that pink insulating foam just to see what effect it has. My multimeter has a temperature probe which I could attach to the filter and monitor temps if I could find the plug for it.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM