broken flywheel
#1
Newbie
Thread Starter
Join Date: Mar 2003
Location: Huntington Bay, NY
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
broken flywheel
I've cracked another flywheel, my second. the first one I replaced took a long time without a lift. now, the new flywheel is cracked again.
If anyone knows the cause, please help.
If anyone knows where I can get a used or donated flywheel, please let me know.
Thanks very much!
If anyone knows the cause, please help.
If anyone knows where I can get a used or donated flywheel, please let me know.
Thanks very much!
![Frown](https://www.rx7club.com/images/smilies/frown.gif)
#4
Full Member
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Join Date: Jul 2002
Location: arlington, tx
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
how do you know it is cracked? have you already took the transmission out? and...how long has been since you replaced it with the newer one? was the replacement used?
#5
Newbie
Thread Starter
Join Date: Mar 2003
Location: Huntington Bay, NY
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
I replaced the flywheel (flexplate). It was cracked around the bolt holes and would have cracked all the way had I not replaced it. This [cracked] one, which I purchased from Mazda, lasted about 10,000 miles.
I purchased the car with a bad engine, one that had seized through lack of oil. I replaced the engine with a rebuilt engine from a company in Washington/Oregon - can't remember the name.
After running for some weeks I noticed that the car shuddered under power. Subsequently, I saw the flywheel had cracked.
My feeling is either the engine I put in has a warped crank or the transmission is bad.
The flywheel, all engine mounts, everything . . . are installed correctly.
If I am on the highway at 70mph and shuddering, if I shift into neutral, the shuddering dies down.
I'm about to give up and sell it.
If you have any suggestions, please offer - I'll give it one last try.
I purchased the car with a bad engine, one that had seized through lack of oil. I replaced the engine with a rebuilt engine from a company in Washington/Oregon - can't remember the name.
After running for some weeks I noticed that the car shuddered under power. Subsequently, I saw the flywheel had cracked.
My feeling is either the engine I put in has a warped crank or the transmission is bad.
The flywheel, all engine mounts, everything . . . are installed correctly.
If I am on the highway at 70mph and shuddering, if I shift into neutral, the shuddering dies down.
I'm about to give up and sell it.
If you have any suggestions, please offer - I'll give it one last try.
Trending Topics
#11
I wanta be with the BUC!
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Join Date: Jan 2003
Location: Knoxville, TN
Posts: 2,305
Likes: 0
Received 0 Likes
on
0 Posts
Do you have a manual, or an atomatic if you have a manual I have an S4 flywheel (stock) that I will sell you, no broekn teeth came off of a running car that I stoll the motor from.
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM