boost problems in 88TII
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Ontario, Canada
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
boost problems in 88TII
yea, i have a boost problem with my 88TII. i get boost, but it maxes out at about 5psi.
i have an intake, exhaust, BOV and no cat, i run a midpipe. does anyone know why i have this problem?
any input would be appreciated. thanks.
i have an intake, exhaust, BOV and no cat, i run a midpipe. does anyone know why i have this problem?
any input would be appreciated. thanks.
#3
Senior Member
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Ontario, Canada
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
no i dont have an FCD. i have an aftermarket boost gauge...and yes, it maxes out.
when i get on the highway and mash the pedal, by the time i get to like 4000rpm, my boost has already been maxed out.
when i get on the highway and mash the pedal, by the time i get to like 4000rpm, my boost has already been maxed out.
#5
Senior Member
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Ontario, Canada
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
lol....autometer gauge with a HKS downpipe and custom mid-pipe....the exhaust is custom too...but it's cheap as hell cuz the previous owner set it up. that's probably my 'real' problem.
maybe i should really upgrade my exhaust system and see what happens. btw, when do you guys get boost in first gear? mine begins at about 4200rpm.
maybe i should really upgrade my exhaust system and see what happens. btw, when do you guys get boost in first gear? mine begins at about 4200rpm.
#6
Locust of the apocalypse
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like
on
1 Post
whats the RANGE on your boost gauge????
My Stock BOV is giving me *****, sometimes it seems like it doesn't close when the car goes from vac to boost and then it woun't hold full boost either.
My Stock BOV is giving me *****, sometimes it seems like it doesn't close when the car goes from vac to boost and then it woun't hold full boost either.
#7
Full Member
Join Date: Feb 2003
Location: Hershey, PA
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Wastegate ported?? Though, even with a huge-*** port, you should still be making more boost... Maybe you're reading your boost gauge wrong. Is it a metric gauge? Maybe you're mistaking .5kg/cm2 for 5psi. I do that every so often, lol. At least none of my friends know anything about cars to notice, and besides, they usually stop paying attention to me if I start talking about my FC.
Trending Topics
#8
Senior Member
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Ontario, Canada
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
no worries, i have since taken care of teh problem.
the problem lied in the fact that i did not run a cat, and my exhaust setup was too restrictive.
so i put on a cat, FCD and new exhaust. car runs great..
i'm only getting 8psi, but hey, for once, my FC is running good. so it's all good.
the problem lied in the fact that i did not run a cat, and my exhaust setup was too restrictive.
so i put on a cat, FCD and new exhaust. car runs great..
i'm only getting 8psi, but hey, for once, my FC is running good. so it's all good.
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
tiger18
3rd Generation Specific (1993-2002)
9
09-03-15 08:27 PM