2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Blinker Issues

Thread Tools
 
Search this Thread
 
Old 10-12-06, 07:46 PM
  #1  
Rotary Slave

Thread Starter
iTrader: (3)
 
FCKing1995's Avatar
 
Join Date: Jul 2005
Location: Birmingham, Alabama
Posts: 1,599
Likes: 0
Received 1 Like on 1 Post
Blinker Issues

Since Ive gotten my 87' Turbo II, the driver side blinkers havent worked. The rear blinker flashes fast and the front one doesnt work. I assumed this was a bad front blinker bulb, so I changed it and it didnt fix it. Anybody know anything else this could be? Wiring issue or the flasher unit bad? This one has me stumped and a bit pissed off
Old 10-12-06, 08:04 PM
  #2  
Former Site Sponsor
 
Atkins Dan's Avatar
 
Join Date: Aug 2003
Location: Tacoma WA
Posts: 4,368
Likes: 0
Received 0 Likes on 0 Posts
Check to see if the lamp is plugged in or just a little dirt is keeping the connectors from connecting like thay should...
'
Dan
Old 10-12-06, 08:08 PM
  #3  
The Cause of Death

 
spot_skater's Avatar
 
Join Date: Mar 2004
Location: New York
Posts: 2,202
Likes: 0
Received 2 Likes on 2 Posts
Change the fluid, first. Then grab a wiring diagram and check for any breaks or connector probs. Power and ground and all that.
Old 10-12-06, 08:11 PM
  #4  
Rotary Slave

Thread Starter
iTrader: (3)
 
FCKing1995's Avatar
 
Join Date: Jul 2005
Location: Birmingham, Alabama
Posts: 1,599
Likes: 0
Received 1 Like on 1 Post
Originally Posted by spot_skater
Change the fluid, first. Then grab a wiring diagram and check for any breaks or connector probs. Power and ground and all that.
No worry there, I put the Type R fluid in, probably why the rear blinker is blinking 5 times per second!!!
Old 10-12-06, 08:13 PM
  #5  
Rotary Slave

Thread Starter
iTrader: (3)
 
FCKing1995's Avatar
 
Join Date: Jul 2005
Location: Birmingham, Alabama
Posts: 1,599
Likes: 0
Received 1 Like on 1 Post
Originally Posted by Atkins Dan
Check to see if the lamp is plugged in or just a little dirt is keeping the connectors from connecting like thay should...
'
Dan
The socket was a bit corroded, took me damn near 5 minutes to get the old bulb out. But once I got it out i cleaned it a bit and everything looked ok when I put the new one back in. I guess tomarrow I will check again and clean it a bit more
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Bauer778
3rd Generation Specific (1993-2002)
10
11-04-15 04:42 PM
betes
1st Generation Specific (1979-1985)
8
09-27-15 08:25 AM
Steven_McKinley
General Rotary Tech Support
12
09-05-15 10:48 AM



Quick Reply: Blinker Issues



All times are GMT -5. The time now is 06:38 AM.