Everyone check the thread in the archive. Post new bolt thread/pitches here and we'll convince a mod at some point to update the archived thread with the new additions.

 

Actually I had that wrong.

Anyway, the spoiler is M8 x 1.25

 

No need to convince. Just PM me with your list and I will update the thread.

 

I saw this thread, and had an idea for a new project, so I worked up a quick rough draft. http://rotarypedia.andern.org

 

Your pitch searching isn't quite working right. It automatically sets 1.0 as the pitch to search for.

 

Fixed; Thanks. The decimal was getting stripped during the search.

 

any other thread patterns at S4 shift **** shares?

 

thanks aaron

 

Aaron, does the archived thread include thread pitches (the number) as oposed to fine/coarse descriptions...?

 

anybody know the size/pitch of the nut that holds the steering wheel on?

 

the shorter started bolt is standard thread. .. it's very odd. it confused the **** out of me while putting my engine back in yesterday. i don't remember the size bolt i used but i'm pretty sure it was standard thread

 

^^ that is the info I need tonight. I am not sure where the short bolt got inserted but the ones I have left or not threading into the tranny to hold the starter?? does anybody know??

 

reminds me, I bought a tap and die set, so i'll start logging whatever bolts i come by

such as

Storage Bin mounts: M6x1.00

 

hey guys im making a shift **** for my car out of steel, M12x1.25? does that mean theirs 12 threads in a 1.25 inches? and wat is the diameter? this is for a S4

 

http://www.boltdepot.com/fastener-in...IandPitch.aspx

 

As an example...

M12 x 1.25 x 25mm means:

diameter = 12mm
pitch = 1.25mm from one thread to the corresponding point on the next thread.
length = 25 mm from bottom of the head

 

does anybody know the bolt size for the bolts/screws for the intank fuel pump assembly that fastens to the tank.....s4 na

 

I was wondering if anyone did know the size of the lower (right) s4 starter bolt, not the long one.

Thanks.

 

I know the NA manilfold to pre-cat or downpipe studs are M12x1.5 (positive on that one). The swaybar endlinks use M10x1.25.

I would also like to know what the threads are on the swaybar mounting braket to chassis bolts.

 

Anyone know the size of the male end of the inner tie rod that goes to the rack?? Trying to get longer ones for my angle kit and I can't order from rock auto anymore from colorado