Best Remanufacturer for Rotary Engines ? Help !!!
#1
Junior Member
Thread Starter
Join Date: Aug 2004
Location: KY
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Best Remanufacturer for Rotary Engines ? Help !!!
Ok guys and gals, This is my first post here but I have a quick question. This is my second RX-7, I had an 85 gslse with the 13b before and now the bug bit me again and i dove into this 88 vert RX7 that also has the 13b. I purchased the car with a blown engine, well not really blown but dragging one rotor. The car will start and run but it definitely lost an apex or two and/or a side seal in the back rotor. I bought the car with the intention of putting a new or used engine in it. These motors are a hard find here where I live and I dont want to chance buying a used one that I have to ship and if something is wrong ship back. I want to know where is a good place to buy a remanufactured engine, I have been eying Atkins Rotary or Mazda Recyclers. Please anyone that has went this route and has actually dealt with any retailer that sells these engines let me know their experience with any of these, or if you have some retailers that I do not know about Please post them and what your experience that you had with them. I dont want to get an engine and it die after 20-30k because of poor craftsmanship and I dont want to get one thats messed before I even install it. If you are going to tell me to rebuild the one I already have, Please don't. I just do not have the time right now to do it and I need the car asap. Thanks in advance.
#3
only the twisties
Join Date: Sep 2003
Location: STL Missouri
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Kevin Landers
www.rotaryresurrection.com
www.rotaryresurrection.com
#5
the closest to you is kevin...and a reman is a rebuilt(reman has new housings and sometimes new rotors-or close to that)...so just send yours to him..he is just about next door to you...wish he was my neighboor
#6
Junior Member
Thread Starter
Join Date: Aug 2004
Location: KY
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Yes, but time is of the essence. I did see his page at rotaryressurection.com and he im sure would probably do a better job than any reman would, but I do not have the time for him to do it or I would. He is about 4 1/2 hours from me so he's not exactly my neighbor hehe
#7
I think the best option in your situation would be to gain a little patience or find some way to not have to rely on this car for a little while and get the engine fixed proper.
to most of us 4.5 hours to kevin lander's shop is not that long of a drive.
a longer wait that results in a well built, reliable engine that willl probably last 120k+ is worth it imo then to rush and end up with a 20k liability.
i would talk to him, who knows, maybe he has a finished engine around and could swap you in a weekend.
to most of us 4.5 hours to kevin lander's shop is not that long of a drive.
a longer wait that results in a well built, reliable engine that willl probably last 120k+ is worth it imo then to rush and end up with a 20k liability.
i would talk to him, who knows, maybe he has a finished engine around and could swap you in a weekend.
Trending Topics
#8
Banned. I got OWNED!!!
I would go ahead and give Kevin a call. Sometimes his work load isn't huge and he could get your job done as quick as it would take to get an engine shipped to you. Worth a shot...
#9
just dont care.
iTrader: (6)
Originally Posted by 88VertRx7
Yes, but time is of the essence. I did see his page at rotaryressurection.com and he im sure would probably do a better job than any reman would, but I do not have the time for him to do it or I would. He is about 4 1/2 hours from me so he's not exactly my neighbor hehe
whereabouts in KY do you live? if its 4.5 hours away from kevin it sounds like you live in louisville like us i'm actually going down to kevins this coming weekend to pick up my car. he hooked me up good, you should check him out.
#12
i live like 10 hours away by plane..that would be about 4000 miles...at least..so if he was 4.5 hours...he would be my neighbor anyway...there is no way a reman woudl get to you any faster than a rebuild..it still takes a few weeks...plus they have a core charge in some cases
#13
Will Work For Apex Seals
Join Date: Jan 2004
Location: Lower NY
Posts: 1,277
Likes: 0
Received 0 Likes
on
0 Posts
i tohught buy reman he meant buying a new motor, so he would only take the 2 days swapping motors, but kevin is the best bet...theres no dobt about that one
#14
Junior Member
Thread Starter
Join Date: Aug 2004
Location: KY
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Thats exactly what I meant Aesop, I may give Kevin a call tomorrow and see what he can do. but yay i can get a motor shipped here by this next coming weekend so i can swap it in, if i order it tomorrow. Would really like to have someone like him rebuild mine but this car is a everyday-take me to work car, so I kind of need it put in and driveable in a hurry.
#15
Mountain Rotary Mod
Join Date: Nov 2003
Location: Freaking Poland!!
Posts: 2,411
Likes: 0
Received 0 Likes
on
0 Posts
You're probably not going to get an engine out of Kevin, but he'd be more then happy to do the rebuild. Kevin does awesome work, but if you're in a hurry you probably should try Mazdatrix or Atkins, both of them are EXCELLENT, but cost more then kevin.
#16
Banned. I got OWNED!!!
From the last time I was there (about 2 weeks) Kevin doesn't have any engines. He just rebuilds them. But like I said, he's pretty quick about it depending on his work load.
Thread
Thread Starter
Forum
Replies
Last Post