I need some 720cc or 750cc injectors for my 87 t2. Do any of you have recommendations on the brand, greddy etc etc... I was thinking of getting greddy, but greddy will probly be paying for the name.

The runner up I believe is rc? What exact injector would I need for a direct plug and play for a an 87 t2, low imp 750cc?

I searched and found alot of threads on what cc injectors to put in, so no answers.

 

get a hold of Keith at KGPARTS...www.kgparts.com .I had some injectors that didn't fit the stock rail,he was able to modify them to fit.He Sells RC injectors..Inquire about Injector Part # PL4-750D.they are Denso style 750's.I am 99% sure that will will plug and play on a stock FC rail.Best to ya.

 

i have a set of brand new oem 720cc gsl-se injectors for sale. if your interested just send me a PM. you cant beat OEM quality. i bought these for my 87 TII and put them on a rebuilt engine which turned out to be blown before i even started it. i then built up a high horsepower engine that required 1600cc injectors so i dont need these. i bought them brand new from mazdatrix for 329 a peice. i will sell them for much cheaper then that...

 

^ Looks like they should go right in, but my sources are telling me gsl-se's are 680cc?

STYX i'll look into it. The injectors that required modification were they rc's, same part # you listed? The part # doesn't appear to be on his site.


Maybe I should just go along with the greddy's, since I know for a fact they are direct. Although they're on average $30 more per injector then a rc..... Save me some money!

 

i've heard the mazda rates them at 680 but they bench test flow at 720..

 

Did mazdatrix confirm this? How much you want, pm me.

 

the Gsl-se's are 680's .but ya,I've also heard that they flow more..like 700.at FC fuel pressure.
Travis.Go to www.rceng.com and see the Injectors there.(RC website) Keith can get them.
By the way.Chris at Eunos can get them too.he quoted me 488 CDN for them,plus shipping etc..I think total was 523 CDN..that was alot to me.
But Keith will give you a real good deal,and I am sure(read his site) that he gives out Brand new Harness connectors with the purchase of a Set of Injectors.(Free Koolaid!...oh yah!!!!)..
there is another site: I just can't think of it...WEST on the Bc forum knows.Try pm'ing him about the Siemens deka Injectors,I think they need modification though.
Cheers,STYX.

 

Yea that's a little steep at eunos. I hope $488 CDN was quoted for all 4?

I might be going with those gsl-se injectors. I wonder though if I would be fine at reaching my goals of 300hp with a bnr stage 2 with these in the secondaries. Along with racing beat rev tii exhaust, rtek 2.1, greddy fmic, apexi twin chamber bov, koyo rad, apexi intake, and when the turbo goes in getting another set of 720cc injectors in the prim?

 

this is true.

also, the "Greddy" injectors are nothing more than a factory mazda (Denso) injectors with the part number ground off the side. 195500-0830 or 195500-0900 is what you would see on the side if they didnt grind it off to hide it.

Best/Cheapest option is to find a used set of gslse injectors and have them professionally cleaned and flow tested. Will save you some money.

 

or just buy these brand new ones that i have...lol im probably one of the only people that bought new mazda injectors from mazdatrix for like $330 a peice lol