Is this bad? pic
#51
More Weight Reduction!!
iTrader: (1)
Join Date: Feb 2006
Location: michigan
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 88rxn/a
holy ****!!...look at these noobs critisizing this piece of craftmanship!!!...you bastards build one and let us tell you how it is!!!
you wont find much better!!!
you wont find much better!!!
I'm not criticizing. You're right I'm a noob, you were too, take it easy. I'm simply asking, "why?" because I'm an incompetent noob. It's a wonder that this site exists, nobody wants to hear anything from people with less than 1000 posts. Yea, I'm so sorry.
#52
RIP Icemark
iTrader: (4)
well the point is, you will find a VERY VERY hard time finding parts this clean for our FC's, the big companies dont pay much attention to us anymore and the little companies pop up but then they go broke or just shut down and usually only a few units are circulating or whoever got one kept it. Clean parts like this attract FC owners like flies on ****
you will figure it out soon enough if you havent already
oh and in addition to the hard to find parts, sure, you can FIND parts for FC's, but the craftsmenship sucks ***** and most of the time unless you spend a rediculous amount of money it looks like crap too
you will figure it out soon enough if you havent already
oh and in addition to the hard to find parts, sure, you can FIND parts for FC's, but the craftsmenship sucks ***** and most of the time unless you spend a rediculous amount of money it looks like crap too
#53
tom port.. AKA streetport
iTrader: (6)
Join Date: Jan 2005
Location: ludlow, pa
Posts: 4,659
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sholitz
I'm not criticizing. You're right I'm a noob, you were too, take it easy. I'm simply asking, "why?" because I'm an incompetent noob. It's a wonder that this site exists, nobody wants to hear anything from people with less than 1000 posts. Yea, I'm so sorry.
WTF you talkin about??i still am a noob!!!...lol...search around for CAI and you wont find much better than this....most stuff that is out for the fc is just straight up insane prices...(BTW..we fc owners are cheap bastards!!)...its cool man..you can have 1,000,000 post and you will still get beat down...welcome to the site!!!
its hard to find good craftsmanship sometimes..their is lots of rigged up boxes but this is the best i have seen so far...
#55
Senior Member
Thread Starter
Join Date: Aug 2005
Location: willis, VA
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
Oh... i was hopping that someone wouldent ask me yet before i could out what the material was. BUt i dont know i was thinking 20.00ish.... what do you all think.
#59
drifting is an artform
Join Date: Mar 2006
Location: Springfield, VA
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
omg, ive been looking for ever for one of these. +1 for the engine bay and +20 for the airbox yo, please put me up on this list for this airbox, just tell me when its ready and ill pay asap!! you dont even have to worry about the trimming around the top if you dont want to, ill finish it lol, hope it fits a 89 GTU! : )
#61
Senior Member
Thread Starter
Join Date: Aug 2005
Location: willis, VA
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
Hey i dont know what to charge i havent (like i said before) got a chance to ask the guy what the material was. And no it will probably be shipped flat, but it will be the finnished product with all parts.
-is 15 better....?
_i just took a look at it and it is like aluminum sheet metal flashing stuff.
-is 15 better....?
_i just took a look at it and it is like aluminum sheet metal flashing stuff.
Last edited by RX drift; 05-20-06 at 08:28 AM.
#62
I am the Autoholic
Join Date: Mar 2003
Location: Kansas, USA
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
Hey, by the way. Just take off your friggin air pump. Get a dual belt alt pulley, and a little filter for the hose going from the pump into the engine or just block it off. You don't need that thing.
#65
Aspiring Neophyte
Join Date: Apr 2006
Location: SF BA, CA
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
You need it for 'emmissions' reasons. So if you have to pass smog you'll need it when you go to test. If they don't smog where you live, then lose it, it's just useless weight.
#66
Originally Posted by RX drift
Hey i dont know what to charge i havent (like i said before) got a chance to ask the guy what the material was. And no it will probably be shipped flat, but it will be the finnished product with all parts.
-is 15 better....?
_i just took a look at it and it is like aluminum sheet metal flashing stuff.
-is 15 better....?
_i just took a look at it and it is like aluminum sheet metal flashing stuff.
#67
Senior Member
Thread Starter
Join Date: Aug 2005
Location: willis, VA
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
oh i thought they didn’t like 20 sry i was just skimming through before work so i was kind of in a hurry.
-and that price was a guess i havent looked at teh price for the sheet metal, or shipping.
-and that price was a guess i havent looked at teh price for the sheet metal, or shipping.
Last edited by RX drift; 05-21-06 at 09:13 AM.
#68
Senior Member
Thread Starter
Join Date: Aug 2005
Location: willis, VA
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
And about the removal of the airpump do you mean to replace the pully with one of the RP Alternator Dual Belt Pulley from rx7.com?
-would it be bad if i took the heat sheilding off from under my hood?
-would it be bad if i took the heat sheilding off from under my hood?
Last edited by RX drift; 05-21-06 at 10:06 AM.
#73
Senior Member
Thread Starter
Join Date: Aug 2005
Location: willis, VA
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
all right, i FINALY go a chance to go and check out the sheet metal to make it. Unless i can get a fair amount of people who want to but one(around 15 i think) then i can produce some. The material costs 80.00 for a roll of 24inx50ft, i can also get a smooth or textured one.
-so give me your opinion on what you all want.
-so give me your opinion on what you all want.
#74
drifting is an artform
Join Date: Mar 2006
Location: Springfield, VA
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RX drift
all right, i FINALY go a chance to go and check out the sheet metal to make it. Unless i can get a fair amount of people who want to but one(around 15 i think) then i can produce some. The material costs 80.00 for a roll of 24inx50ft, i can also get a smooth or textured one.
-so give me your opinion on what you all want.
-so give me your opinion on what you all want.
i'd have mine just like you have it on urs cuz its beautiful
and btw, i wouldnt take off the heat shielding on the underbottom of your hood, i read somehwere on the forum that it will cause fading one one side of the hood, not sure which side tho.
plus im sure more than 15 ppl will want to buy your work. i know i want one, good luck..
Last edited by fc.fanatic; 05-31-06 at 05:24 PM.
#75
TANSTAFL
iTrader: (13)
Originally Posted by Goofy
Anyone ever do temperature tests in the stock airbox, CAI airbox and engine bay for comparison?
btw the engine bay temps around there on a warm day get up to 150+ as measured by thermocouple. this was just sitting in grid. however, the engine never ran for more than 5 minutes stationary.
https://www.rx7club.com/showthread.p...=1#post5715848