2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Bad engine? or just needs a kick in the arse?

Thread Tools
 
Search this Thread
 
Old 07-04-02, 12:00 AM
  #1  
Junior Member

Thread Starter
 
Join Date: Apr 2002
Location: Springfield, MO
Posts: 24
Likes: 0
Received 0 Likes on 0 Posts
Talking Bad engine? or just needs a kick in the ****?

OK guys here's the story. I bought an 89 gxl for 500 bucks. the kid said it wouldnt start. I suspected it was flooded. After going through the braking system, and fixing a clutch problem, I've concluded that the car has set for a Long period of time. Long enough for the Slave cylinder and Brake calipers to corrode and seize up on me. I can get the car started using the "3 step unflooding procedure" but it doesnt idle. if kept at around 2k it will run. it doesnt sound weird or anything. Since it has set for such a while, is the motor bad? or should I ATF it and Hope for the best? Thanks for your input.
~midi
Old 07-04-02, 12:06 AM
  #2  
Rotary Enthusiast

iTrader: (2)
 
Manolis_D's Avatar
 
Join Date: Sep 2001
Location: Altadena, CA
Posts: 932
Likes: 0
Received 0 Likes on 0 Posts
try pulling the plugs and checking for 3 "WHOOSH'es" from each rotor -- if they're all there, then chances are the motor is OK and there is something else wrong. If not, then you might as well soak it in ATF for a few days (weeks?) and see what happens!

Good luck!,
manolis
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Th0m4s
Build Threads
25
02-26-19 02:04 AM
Queppa
New Member RX-7 Technical
8
09-02-18 09:53 AM
gtcd
1st Generation Specific (1979-1985)
30
08-19-15 02:44 AM



Quick Reply: Bad engine? or just needs a kick in the arse?



All times are GMT -5. The time now is 01:35 AM.