2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

bac,asv,egr block off plates

Thread Tools
 
Search this Thread
 
Old 02-18-04 | 08:39 PM
  #1  
Thread Starter
Junior Member

 
Joined: Jan 2004
Posts: 19
Likes: 0
From: saginaw, michigan
bac,asv,egr block off plates

im sure this is probably a repost but what kind of gains can i expect to see from blocking off these systems? will the car still idle at a streetable level?
how will gas milagebe affected? will i need to block off or do any other mods to do this?
Old 02-18-04 | 09:30 PM
  #2  
Digi7ech's Avatar
I break Diff mounts
iTrader: (1)
 
Joined: Jun 2002
Posts: 4,403
Likes: 4
From: Avondale, Arizona
The BAC I believe affects idle a little while but the other stuff pretty much does nothing.

I'm goin no airpump and no ACV while keeping the BAC.
No EGR on my S5 either so can't comment on that.
Old 02-18-04 | 09:42 PM
  #3  
Relisys190's Avatar
REINCARNATED
iTrader: (4)
 
Joined: Apr 2003
Posts: 1,656
Likes: 154
From: South Eastern USA
I have removed all the items/valve that acctually make the car user friendly. but my car is perfectly streetable. idles steady at 800-850 (little high). The BAC Valve compensates for load on the engine IE: A/C or P/S. I have none of these luxury's.

I have no BAC, ACV, EGR, vacume silonoid rack, remove coolant from around TB (complete bypass), removed p/s, A/C, air-pump, ported intake runners/TB and pulled 5th/6th port sleeves out and blocked off lower Intake manifold. All with a rock solid idle.


-Markus Reschny
www.mazsport.net
Old 05-11-04 | 04:02 PM
  #4  
T2R7's Avatar
long term project

 
Joined: Nov 2002
Posts: 215
Likes: 0
From: Syracuse, NY
is there a write up anywhere on how to go about removing the "vacuum selinoid rack". I think this is also reffered to as the rats nest. please pm me with write-up
Old 05-11-04 | 06:50 PM
  #5  
Zer0 Cylinder's Avatar
Banned. I got OWNED!!!
 
Joined: Dec 2003
Posts: 1,666
Likes: 1
From: here.
there's a few emmissions removal how-to's around........ive yet to find one in depth. www.rotaryresurrection.com has a good write up on what the parts actually do.

but i havent seen any detailed instructions except for "just yank the ______ off"...

one would be appreciated.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jakeishness
2nd Generation Specific (1986-1992)
11
09-11-15 12:33 PM
sinclair7seven
General Rotary Tech Support
11
09-11-15 11:15 AM




All times are GMT -5. The time now is 05:25 AM.