apexi neo sensor not detecting voltage
07-12-10, 11:36 AM
#1
Newbie
Thread Starter
Join Date: Apr 2005
Location: Australia, Newcastle
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
apexi neo sensor not detecting voltage
Well I install the apexi neo but the sensors is not detecting voltage
even the battery voltage is incorrect
The only thing that works is the rpm, I have tested the wires with a muitmeter I m getting voltage from them but on the neo it either says 0 or sometime it go to max voltage like 5v throttle and 16v for battery
I saw some post it says you need to have the wires 1cm apart but I didnt do that I just wire the IG wires together so could that be the problem
Anyway thanks for you help
Eddy
even the battery voltage is incorrect
The only thing that works is the rpm, I have tested the wires with a muitmeter I m getting voltage from them but on the neo it either says 0 or sometime it go to max voltage like 5v throttle and 16v for battery
I saw some post it says you need to have the wires 1cm apart but I didnt do that I just wire the IG wires together so could that be the problem
Anyway thanks for you help
Eddy
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
