apexi
#1
Full Member
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Jan 2002
Location: Buford, GA
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
apexi
anyone here have an apexi afc-r? I am going to get one but wanted to know if it would be a good tool to use in conjuntion with a walbro fuel pump and maybe a fuel pressure boost. I am going to be running a supercharger at about 6lbs of boost.
#2
SOLD THE RX-7!
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
umm, that's not going to help you with a supercharger... only for turbo.
if you are talking about the s-afc then yes it'll help. but you'll need some bigger injectors as well.
if you are talking about the s-afc then yes it'll help. but you'll need some bigger injectors as well.
#3
Full Member
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Jan 2002
Location: Buford, GA
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Now how do you figure ti is not going to help me? A paxton nelson kit only comes with a fuel booster and that is satifactory. I am going a little higher. The most I will want to get is some tII injectors maybe.
#4
Full Member
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Join Date: Mar 2002
Location: Oklahoma City, OK
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
I don't know what kind of fuel pressure numbers you need, but with the walbro gss341 you are going to be running rich most likely. You will need bigger injectors but I don't see why the S-AFC wouldn't work for you. Maybe Scott can explain.
#6
The avc-r is a boost controller for a turbo. The s-afc is used to control the fuel (curve). What do you need? You would prolly be good fuel-wise with a TII pump and injectors.
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
17
06-03-24 03:25 PM