Aftermarket Dual Exhaust
#1
Senior Member
Thread Starter
Join Date: Jan 2004
Location: Vancouver, B.C.
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Aftermarket Dual Exhaust
most people say get racing beat but honestly, i dont like how they look. i was looking at GReddy PE but it says that theres only a few left or something like that. so my question is besides the GReddy PE what is another streetable but high flowing exhaust system. the 2 other ones that i was intrested in was the HKS Hi-Power and one that really caught my attention was the JIC-Magic Bullet 505S Ti Cat-Back ... if anyone can give sound clips or even a opinion on any of the exhaust systems i mentioned that would b great.
Danny
Danny
#2
Will Work For Apex Seals
Join Date: Jan 2004
Location: Lower NY
Posts: 1,277
Likes: 0
Received 0 Likes
on
0 Posts
well I was going to say Greddy, but nevermind, the HKS Dragger? or TI? one of those two. The HKS is rather loud, but good quality. The Greddy sounds the best, rather quiet.
#4
Eat Rice Don't Drive it.
iTrader: (3)
If you have an N/a only use Apexi N1's if you like the sound of riceboxes. If you have a TII be aware that it will be LOUD and buzzy sounding. Racing beat or Borla is all I would personally use. It is modest with just as much if not more performance than all the Rircer looking ones.
Santiago
Santiago
#5
Rotary Freak
while we are talking bout exhaust what would a t2 sound like with the racing beat 3" downpipe to 3'' pre silencer to a apexi dual n1 i tried to dl some movies already butthey never work on my computer does anyone have a clip of that setup also what size piping is used for the y pipe and pipes coming out from the y pipe to mufflers on the apexi dual n1 kit
#6
Senior Member
Join Date: Feb 2004
Location: Vega Alta, PR
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
Santiago....you got pics of the Borla system? is it dual exhaust? Lol I keep hearing you talking about it and Im getting even more interested...How much is it? got a link?
#7
I had the Borla set-up on my 6-port motor...with a RB header and presilencer it sounded ******' TIGHT!!!! Like a bike at high revs, I wish I had a sound byte of that ****. It was a 2.5" pipe dumping into dual 2.25's with the round mufflers and those old style intercooled round tips (3") All stainless. I loved it, it was just too small for the turbo engine.
Trending Topics
#8
Rotary Enthusiast
Join Date: Jun 2003
Location: Millville, NJ
Posts: 1,424
Likes: 0
Received 0 Likes
on
0 Posts
I'd go with the Greddy over the Borla, Borla's products hardly ever produce gains big enough to justify buying the product.. I had borla headers on my Impreza, and they only netted 5HP, whereas a equal length header would have netted 14-19HP..
#9
Eat Rice Don't Drive it.
iTrader: (3)
Originally Posted by 91mazdarx7
while we are talking bout exhaust what would a t2 sound like with the racing beat 3" downpipe to 3'' pre silencer to a apexi dual n1 i tried to dl some movies already butthey never work on my computer does anyone have a clip of that setup also what size piping is used for the y pipe and pipes coming out from the y pipe to mufflers on the apexi dual n1 kit
Well it would probably be loud. That is IF you fabricated it to work. I think you should know that the Apexi N1's are 2.5" IIRC which isn't going to mate up to a 3"
Santiago....you got pics of the Borla system? is it dual exhaust? Lol I keep hearing you talking about it and Im getting even more interested...How much is it? got a link?
#12
Rotary Freak
[QUOTE=1987RX7guy]Well it would probably be loud. That is IF you fabricated it to work. I think you should know that the Apexi N1's are 2.5" IIRC which isn't going to mate up to a 3"
what does that mean Apexi N1's are 2.5" IIRC about the IIRC is that the y pipes size on the end towards the pre silencer and whats the size of the 2 pipes going from the y pipe to the mufflers
what does that mean Apexi N1's are 2.5" IIRC about the IIRC is that the y pipes size on the end towards the pre silencer and whats the size of the 2 pipes going from the y pipe to the mufflers
#13
Senior Member
iTrader: (4)
Join Date: Jul 2003
Location: The Great Northwest
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts
exhaust
I dont have the exhaust that your inquiring about. I think choosing from these exhaust is a matter of preference. I have the dual N1 Apexi catback w/a silencers and love them. It is not loud like other people are saying then again I have a silencer on it. I yet to run it without the silenser to find out just how loud it is with a N/A. This catback is louder than the OEM catback w/ a nice growl tone. And, its not buzzy nor ricey to me. Like I said earlier its a matter of preference.
#16
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
Careful there kiddo, flaming will get you a warning and a forum holiday. My post was not in any way personal or insulting, so your insults were not warranted. Pull your frickin' head in.
And if you don't think calling exhaust tips "intercooled" isn't incredibly funny (and utterly stupid) then you need to learn a little more about cars...
And if you don't think calling exhaust tips "intercooled" isn't incredibly funny (and utterly stupid) then you need to learn a little more about cars...
#17
Senior Member
Thread Starter
Join Date: Jan 2004
Location: Vancouver, B.C.
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
i duno why ... when i saw "intercooled tips" i was reminded of crappy tires bov style exhaust tips lol ... i wanna put one on my moms aerostar hahah vrrrooomm pshhh.
... anywayz back on topic. im hoping that GReddy PE's will still b in stock by earlier next year..... BUT if not, anyone know anything about the jic magic dual bullet cat-back? it looks like a good smooth flowing system but i really dont want an exhaust that will drone on the highway. anyone ever heard it before?
... anywayz back on topic. im hoping that GReddy PE's will still b in stock by earlier next year..... BUT if not, anyone know anything about the jic magic dual bullet cat-back? it looks like a good smooth flowing system but i really dont want an exhaust that will drone on the highway. anyone ever heard it before?
#18
Senior Member
Join Date: Feb 2004
Location: Vega Alta, PR
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
Ummm.....quick question.....an FC's stock exhaust piping....is it good? Like if I gutted the cats and put on mufflers on (just for now until I get more money to do 2" piping all the way back with a presilencer and headers) Would the stock piping with gutted cats give me the same flow as new piping or is the stock too restrictive?
#22
Rotary Freak
hey 1987rx7guy what did you mean by this [QUOTE=1987RX7guy]Well it would probably be loud. That is IF you fabricated it to work. I think you should know that the Apexi N1's are 2.5" IIRC which isn't going to mate up to a 3"
what does that mean Apexi N1's are 2.5" IIRC about the IIRC is that the y pipes size on the end towards the pre silencer and whats the size of the 2 pipes going from the y pipe to the mufflers
what does that mean Apexi N1's are 2.5" IIRC about the IIRC is that the y pipes size on the end towards the pre silencer and whats the size of the 2 pipes going from the y pipe to the mufflers
#23
Senior Member
Join Date: Jul 2001
Location: Muskegon, Mi
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
I have RB 3" DP with custom*cough* no cat *cough* mid pipe and the Greddy PE dual cat back. I absolutly love the sound of the Greddy system. At idle it had a VERY low note to it and it really doesnt get loud unless I am really getting on the gas. IMO its a great sounding system.
#24
Rotary Freak
I'd get a GReddy PE system if I had the money or the need for an exhaust. I have the HKS Sport system right now. Sounds nice when hooked up to a 2.5 inch custom single cat and the RB header.
#25
Eat Rice Don't Drive it.
iTrader: (3)
[QUOTE=91mazdarx7]hey 1987rx7guy what did you mean by this
iirc=if i recal corectly
I remember but haven't verified that the piping on the Y =-pipe for the N1's is 2.5 which will not fit a 3" without fabrication.
Originally Posted by 1987RX7guy
Well it would probably be loud. That is IF you fabricated it to work. I think you should know that the Apexi N1's are 2.5" IIRC which isn't going to mate up to a 3"
what does that mean Apexi N1's are 2.5" IIRC about the IIRC is that the y pipes size on the end towards the pre silencer and whats the size of the 2 pipes going from the y pipe to the mufflers
what does that mean Apexi N1's are 2.5" IIRC about the IIRC is that the y pipes size on the end towards the pre silencer and whats the size of the 2 pipes going from the y pipe to the mufflers
I remember but haven't verified that the piping on the Y =-pipe for the N1's is 2.5 which will not fit a 3" without fabrication.