Added mods, now car doesent start!...
#26
Taste great, more filling
![](https://www.rx7club.com/images/misc/10_year_icon.png)
iTrader: (1)
Join Date: Feb 2005
Location: Dallas, TX
Posts: 2,012
Likes: 0
Received 0 Likes
on
0 Posts
I apologize profusely, you are correct!
#28
Retired Moderator, RIP
![](https://www.rx7club.com/images/misc/10_year_icon.png)
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
you are SO subtle Joe!..got that "magic" touch!..heh,heh!.. Step one,Take the plugs out,replace ,clean Or Whatever..Crank the engine over 30 sec without Plugs in..put plugs back in,put the Plug wires on Correctly,with the Egi Fuses in place.it should Start up.IF everything is Ok..if not then Try it again..From Step ONE..(this Is If indeed the car IS flooded).
#29
Taste great, more filling
![](https://www.rx7club.com/images/misc/10_year_icon.png)
iTrader: (1)
Join Date: Feb 2005
Location: Dallas, TX
Posts: 2,012
Likes: 0
Received 0 Likes
on
0 Posts
That'll do it. It took about a mile and half to get the engine going for me last time.
Most of that was due to leaving the big port on the back of the LIM open, though.
![Big Grin](https://www.rx7club.com/images/smilies/biggrin.gif)
![Big Grin](https://www.rx7club.com/images/smilies/biggrin.gif)
#30
Passing life by
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Or it will jump start your plug with 30,000 volts
#32
tom port.. AKA streetport
![](https://www.rx7club.com/images/misc/15_year_icon.png)
iTrader: (6)
Join Date: Jan 2005
Location: ludlow, pa
Posts: 4,659
Likes: 0
Received 0 Likes
on
0 Posts
pull that EGI inj. fuse....FLOOR the car and crank untill ALL the mist stops poring out of the spark plugs holes (with spark plug removed) pour a little ATF (automatic tranny fluid) to help....the 2 stroke will do the same thing...build back compressioin you lost since the gas is killing the seal the oil usually makes...re-insert spark plugs, EGI inj. fuse and you should be fine...id buy new spark plugs now also.
#33
- Make Haste -
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Apr 2005
Location: Calgary, Alberta
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
i floored the car for 30secs, tried to start it....
nothing....
the gas REAKS of fuel, absolutely reaks....
i'm thinking take plugs out, crank over for a while, put 2cyl in and try to start it, if no avail, oil change and go from there, or?...
can i just push start it?, i'm sure it'll start that way....
but i heard it's REALLY bad for a rotary....
by the way, i cleaned my plugs so they are basically BRAND NEW....
( metal wheel )....
nothing....
the gas REAKS of fuel, absolutely reaks....
i'm thinking take plugs out, crank over for a while, put 2cyl in and try to start it, if no avail, oil change and go from there, or?...
can i just push start it?, i'm sure it'll start that way....
but i heard it's REALLY bad for a rotary....
by the way, i cleaned my plugs so they are basically BRAND NEW....
( metal wheel )....
![Wink](https://www.rx7club.com/images/smilies/wink.gif)
#36
tom port.. AKA streetport
![](https://www.rx7club.com/images/misc/15_year_icon.png)
iTrader: (6)
Join Date: Jan 2005
Location: ludlow, pa
Posts: 4,659
Likes: 0
Received 0 Likes
on
0 Posts
it took me longer than 30 seconds a few times....i had to hook a set of jumper cables onto my car it took so long. did the mist quit spraying out of the spark plug holes?
id just popo start it/pull start
dont you have a race going on?? shouldnt you be out trying to catch up!?
id just popo start it/pull start
Really!? OMG!!!
![Wink](https://www.rx7club.com/images/smilies/wink.gif)
#37
- Make Haste -
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Apr 2005
Location: Calgary, Alberta
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
popo start it?...
i didnt pull the plugs yet, thats what i plan on doing tommorow....
yeah, my poor optima red is starting to cry from abuse....
i didnt pull the plugs yet, thats what i plan on doing tommorow....
yeah, my poor optima red is starting to cry from abuse....
#39
Taste great, more filling
![](https://www.rx7club.com/images/misc/10_year_icon.png)
iTrader: (1)
Join Date: Feb 2005
Location: Dallas, TX
Posts: 2,012
Likes: 0
Received 0 Likes
on
0 Posts
I don't know why it would be bad for a rotary, you're not asking the engine to do anything it's not designed to do. Just make sure you put some oil in the plug holes first so it's not running dry.
#40
new to the rotary world
![](https://www.rx7club.com/images/misc/05_year_icon.png)
hey i had my car get flooded like hell too so i took it to a mazda dealer and what they did was a compression start it. i guess it worked after 2 times from what they said
#41
- Make Haste -
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Apr 2005
Location: Calgary, Alberta
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
whats a compression start?...
tonight, i'm going to pour some oil into the spark plug hole's and if i can get it started, i'm changing the oil right away....
the TPS should be fine since i moved it from the other TB, correct?, i wouldnt have to re-adjust it?...
wish me luck guys, this is an annoyance!...
tonight, i'm going to pour some oil into the spark plug hole's and if i can get it started, i'm changing the oil right away....
the TPS should be fine since i moved it from the other TB, correct?, i wouldnt have to re-adjust it?...
wish me luck guys, this is an annoyance!...
#44
- Make Haste -
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Apr 2005
Location: Calgary, Alberta
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
ok, so i took the plugs out, deflooded the engine, put some 2cyl oil in the bottom plugs ( same one's i took out to deflood ), cranked it over for a sec with the EGI out, put everything back, cranked it, aaaaaaaaaaaand....
nothing....
so i did an oil change, deflooded it again, checked plugs, for spark, everything, no spark on the bottom wires, spark on the top one's, i did EVERYTHING, put it back together, aaaaaaaaaaand....
nothing....
i'm shot guys, i have no idea whats wrong with it, there's a TON of white mist everytime i deflood the engine, i wait till it's all gone, replace plugs, wires, all of it but it still wont start, i have no idea what's left to do, thing is, why are the trailing coils firing where the primaries arent?, ( the upper plugs/wires fire, lowers dont ), are all 4 spark plugs supposed to fire?, all 4 injectors supposed to fire?...
any idea's!?..
nothing....
so i did an oil change, deflooded it again, checked plugs, for spark, everything, no spark on the bottom wires, spark on the top one's, i did EVERYTHING, put it back together, aaaaaaaaaaand....
nothing....
i'm shot guys, i have no idea whats wrong with it, there's a TON of white mist everytime i deflood the engine, i wait till it's all gone, replace plugs, wires, all of it but it still wont start, i have no idea what's left to do, thing is, why are the trailing coils firing where the primaries arent?, ( the upper plugs/wires fire, lowers dont ), are all 4 spark plugs supposed to fire?, all 4 injectors supposed to fire?...
any idea's!?..
#45
Rotary Enthusiast
Join Date: Mar 2007
Location: Pasadena
Posts: 1,485
Likes: 0
Received 0 Likes
on
0 Posts
My car was rediculously rich when I first started it because I put my connectors for primary and 2ndary injectors switched. 550cc primary and 1600cc 2ndaries. My friend had built my megasquirt and all the wires were the same color, and the primary wires were longer than the 2ndaries
#46
- Make Haste -
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Apr 2005
Location: Calgary, Alberta
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
My car was rediculously rich when I first started it because I put my connectors for primary and 2ndary injectors switched. 550cc primary and 1600cc 2ndaries. My friend had built my megasquirt and all the wires were the same color, and the primary wires were longer than the 2ndaries
![Frown](https://www.rx7club.com/images/smilies/frown.gif)
#47
Junior Member
Join Date: Jul 2007
Location: W.A. Aussie
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
I think the leading spark does most of the work, i had my FC running on leading spark only for ages with out even noticing, i think the trailing spark more or less completes the burn. so i'd figure out why you've got no leading spark
#49
- Make Haste -
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Apr 2005
Location: Calgary, Alberta
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
yes i put the leading fuse back in, ahahaha, god help me if i didnt!...
i still have no idea what's wrong or why it isnt start at all....
heeeeeeelp....
i still have no idea what's wrong or why it isnt start at all....
heeeeeeelp....
#50
new to the rotary world
![](https://www.rx7club.com/images/misc/05_year_icon.png)
hey archangels a compression start is when you have somebody push your car and you (pop the clutch) ever heard of that but if you slowly/ normaly release the clutch it will start your car. but your keys have to be in the on position