87 tII will not idle
#26
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 22 Likes
on
20 Posts
****I taped the TID and my car idles now! At first it idles at a solid 900...but after i drive it, it gets really low...almost to the point of stalling out******
The car idles fine when first started up because the thermowax is holding the throttle plates open a tad. As the water warms up, the idle goes down because the thermowax is letting the throttle plates slowly return to full close. That is normal.What is not normal is the idle being very low when warmed up. So.....set the timing,then set the tps, then set the idle per the fsm that is online and free to look at.
Come to think about it some more...and I think your problem may very well be the bac is not working. The bac has a duty cycle who's purpose is to maintain a 750rpm idle. See....http://www.teamfc3s.org/info/articles/idle.html
The car idles fine when first started up because the thermowax is holding the throttle plates open a tad. As the water warms up, the idle goes down because the thermowax is letting the throttle plates slowly return to full close. That is normal.What is not normal is the idle being very low when warmed up. So.....set the timing,then set the tps, then set the idle per the fsm that is online and free to look at.
Come to think about it some more...and I think your problem may very well be the bac is not working. The bac has a duty cycle who's purpose is to maintain a 750rpm idle. See....http://www.teamfc3s.org/info/articles/idle.html
Thread
Thread Starter
Forum
Replies
Last Post
RotaryBobby
1st Generation Specific (1979-1985)
1
09-10-15 01:33 PM