87-88 Mazda RX7 1.3L 13B turbo rotary motor, will this work in 88 rx-7 non turbo N/A
#1
87-88 Mazda RX7 1.3L 13B turbo rotary motor, will this work in 88 rx-7 non turbo N/A
Hi I am Thinking about purchasing a 87-88 Mazda RX7 1.3L 13B turbo rotary motor 13BT because my engine is blown my engine is a non turbo 13B will this engine fit...if not how can i make it fit...is there anyone in this area that can install it for me for under $500 thanks alot
zac
zac
#3
Yes, 13BT will fit.
Out of curiosity, how long you had a 7? What's the whole story on the engine(s)? we all know these engines are rotary and 1.3 liters, that's what "13B" means. You just spat a bunch of info, what's the story?
Out of curiosity, how long you had a 7? What's the whole story on the engine(s)? we all know these engines are rotary and 1.3 liters, that's what "13B" means. You just spat a bunch of info, what's the story?
Last edited by Aaron Cake; 12-06-05 at 04:57 PM.
#4
i just bought it and the engine has no power dosent idle and dosent start very well
i just thought i could get a new engine and not screw with it anymore.
zac
i just thought i could get a new engine and not screw with it anymore.
zac
Last edited by Aaron Cake; 12-06-05 at 04:57 PM.
#5
Yes the 13bt will fit. Just know there are a few *recommended* things you should upgrade as well. The search function is very helpful, not only on the info about you're topic, but also people that may have done this swap in the past.
Last edited by Aaron Cake; 12-06-05 at 04:58 PM.
#6
if you need someone to put it in, you should be posting the regional sections for the area in which you live, not here in the 2nd gen technical section. However I personally doubt that anyone would be willing to do an 13BT engine swap into a non turbo for only $500.
Toss in that seldom are used motors (like Jspecs) a good choice for anything but rebuilding you may have trouble even locating a decent motor and drive line.
And drop that attitude newbieRX-7. You won't get any help from anyone if you cop an attitude right off.
Toss in that seldom are used motors (like Jspecs) a good choice for anything but rebuilding you may have trouble even locating a decent motor and drive line.
And drop that attitude newbieRX-7. You won't get any help from anyone if you cop an attitude right off.
Last edited by Icemark; 12-06-05 at 12:21 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 04:47 PM