86 fc in need of rebuild?
03-09-09 | 09:06 AM
#1
Thread Starter
Joined: May 2006
Posts: 369
Likes: 0
From: Fact. Bears eat beets. Bears. Beets. Battlestar Galactica.
86 fc in need of rebuild?
Hey im looking for a decent rebuild kit thats not to far out in price cause im broke and where to get the cd to learn to rebuild them as well. Thanks
03-09-09 | 01:26 PM
#2
Have you tried searching? I know rotoryresurrection has a writeup online somewhere...i remember reading it. Its a really good one with a ton of pictures. Tried hunting it down but i can't seem to find it. Check the archives too, thats always a good place to start.
03-09-09 | 05:08 PM
#5
Listen to King Diamond.
iTrader: (4)
Joined: Dec 2006
Posts: 2,847
Likes: 9
From: Sterling Heights, MI
The rotary resurrection writeup is gone...
I have the Mazdatrix DVD, it is very good and detailed. I highly recommend it. As for rebuild kits, Atkins Rotary is pretty popular, and have reasonable prices.
I have the Mazdatrix DVD, it is very good and detailed. I highly recommend it. As for rebuild kits, Atkins Rotary is pretty popular, and have reasonable prices.
03-10-09 | 11:29 AM
#7
Thread Starter
Joined: May 2006
Posts: 369
Likes: 0
From: Fact. Bears eat beets. Bears. Beets. Battlestar Galactica.
Well let me put in the whole story. Ok this engines got 277k on her and she still runs strong or did until i tore off all of the emissions stuff encluding: acv, bac, egr and the zero temp thing and got rid of the omp with the oil injectors so now i run 2 cycle in the gas. I also put on a port and polished tb. now all shes does when shes starts if she does is flood out the plugs or she wont idle on her own! So the engines still good i just thing shes alittle worn out!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
