3 vacuum hoses????????
#1
Junior Member
Thread Starter
Join Date: Jun 2002
Location: topeka, ks
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
3 vacuum hoses????????
Allright I removed my cats from my exhaust. I thought since I dont need the air pump any more I should take it off. I bought the block off plates and removed my ACV the only problem I have now is I have 3 vacuum hoses that I have no Idea what to do with(the hard lined ones next to the acv). Any ideas of what I can do with them as for as routing or block off. Please help.
#4
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
it is... they are no longer needed without the AVC
just make sure you block them off, don't route a line from one to the other thinking that is ok. and don't use them for a boost source like to the pressure sensor.
just make sure you block them off, don't route a line from one to the other thinking that is ok. and don't use them for a boost source like to the pressure sensor.
#6
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 22 Likes
on
20 Posts
Of those three only one was a vacuum. It went to the grey solenoid. The other two were pressure. One of those took air from the airpump TO the blue solenoid and the other returned that air to the acv at the bottom to power the relief diaphram in the bottom of the acv.
Like they say, just plug each end with something. Two to keep the dirt out and the one to keep the vacuum from sucking.
Like they say, just plug each end with something. Two to keep the dirt out and the one to keep the vacuum from sucking.
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
17
06-03-24 03:25 PM