2 nipples on stock 91 FPR ?
#1
2 nipples on stock 91 FPR ?
I have weird problem, on my 91 TII i have 2 nipples on FPR and i can`t find any info about it or how to hook it up...
http://rx7cz.net/photos/workshop16/IMG_1152.JPG
http://rx7cz.net/photos/workshop16/IMG_1152.JPG
#2
Banned. I got OWNED!!!
![](https://www.rx7club.com/images/misc/10_year_icon.png)
What the ******!!
Never seen that **** before. Damn, Im speechless.
I would recommending obtaining a fuel rail from a US or J-spec s5 t2, or adapting a different rail to work (one from an s4 t2 should) to get around this mystery.
IF youre intent on making this work, I would get rid of the vacuum bullshit, and tee both lines into a vacuum/boost nipple somewhere on the engine...it's my guess that if anything would work properly this would be it.
Never seen that **** before. Damn, Im speechless.
I would recommending obtaining a fuel rail from a US or J-spec s5 t2, or adapting a different rail to work (one from an s4 t2 should) to get around this mystery.
IF youre intent on making this work, I would get rid of the vacuum bullshit, and tee both lines into a vacuum/boost nipple somewhere on the engine...it's my guess that if anything would work properly this would be it.
#3
i kept my S4 TII rail, just swapped injectors so i should not have problem to finish install...but i was hoping to find some more info about this....
there are other things i can`t find in US FSM's
:
http://rx7cz.net/photos/workshop15/IMG_1120.JPG
vacuum *box* (filter?) right besides main fuse box to which goes vac hose from solenoids area (splitting there to 2 hoses as seen in picture...
there are other things i can`t find in US FSM's
:
http://rx7cz.net/photos/workshop15/IMG_1120.JPG
vacuum *box* (filter?) right besides main fuse box to which goes vac hose from solenoids area (splitting there to 2 hoses as seen in picture...
#7
anybody got idea what this round connector is ?
on the part of engine harness where water pump connector is, pointing directly to camera :
http://rx7cz.net/photos/workshop17/IMG_1156.JPG
on the part of engine harness where water pump connector is, pointing directly to camera :
http://rx7cz.net/photos/workshop17/IMG_1156.JPG
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM