13b woes
06-09-10, 08:41 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2006
Location: okotoks,alberta
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
13b woes
i have a 78 rx7 n/a and it has 215000k on it i have not doen a copm cheak guna do that today, it is low on power but it still runs really good and starts good. i was told that my irotor housings are worn out is this true? and what is your take on the atf treatment?
or mazdas zoom rotary engine cleaner.
or mazdas zoom rotary engine cleaner.
06-09-10, 08:58 PM
#2
Wow, thats a champ engine. Your posting in the 2nd gen section, your car is a first generation rx7. ATF is bad, just use marval mystery oil as a substitue.
Mazda zoon cleaner will be awsome if you can run that. Not much you can do on a low compression engine. Hope it keeps running for you.
Your rotor housings can in fact be worn, as well as your seals on the rotors themselves. Keep reading and searching around and read the FAQ's, lots of information on here regarding all these topics.
Mazda zoon cleaner will be awsome if you can run that. Not much you can do on a low compression engine. Hope it keeps running for you.
Your rotor housings can in fact be worn, as well as your seals on the rotors themselves. Keep reading and searching around and read the FAQ's, lots of information on here regarding all these topics.
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM