10-9 second build with Boost Innovations
04-15-07, 10:38 PM
#126
Senior Member
Thread Starter
here is the progress from this weekend
i got the intake manifold done minus an aluminum 3" 90 that needs to be welded on the end of the throttle body
the throttle body is off of an LS1 and is a 75mm, so it is about just right
um did acouple of block off plates, got timming set, redid the clutch line and bleed the bastard.
did the 4" DP and ceramic coated the DP, turbine wheel and center section
got some of the fuel plumbing done aswell... should get the parts in the mail to finish it tommorrow
should be able to fire it up tommorrow if i get stuff and have enough time
just need to do the oil feed/drain for the turbo, and oil cooler lines....
the manifold will be painted soon
after i get her started and run in alittle to see how everything works
here are some of the car and the way it sits.....
here are some of the DP and coated center section
um and some of the TB and rest of some progress
that is all
i got the intake manifold done minus an aluminum 3" 90 that needs to be welded on the end of the throttle body
the throttle body is off of an LS1 and is a 75mm, so it is about just right
um did acouple of block off plates, got timming set, redid the clutch line and bleed the bastard.
did the 4" DP and ceramic coated the DP, turbine wheel and center section
got some of the fuel plumbing done aswell... should get the parts in the mail to finish it tommorrow
should be able to fire it up tommorrow if i get stuff and have enough time
just need to do the oil feed/drain for the turbo, and oil cooler lines....
the manifold will be painted soon
after i get her started and run in alittle to see how everything works
here are some of the car and the way it sits.....
here are some of the DP and coated center section
um and some of the TB and rest of some progress
that is all
04-15-07, 10:43 PM
#128
Senior Member
Thread Starter
ha... on hte one pic i noticed that the injectors and rail look all crooked and ****
they are just not fully seated
thought id throw that out there
and i modded the stock primary rail to fit in the fd intermediate housing also, required alittle cutting and welding
they are just not fully seated
thought id throw that out there
and i modded the stock primary rail to fit in the fd intermediate housing also, required alittle cutting and welding
04-16-07, 09:31 AM
#130
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 110 Likes
on
93 Posts
Originally Posted by zbrown
ha, you caught me.... back home in a town of 200 people you had a slim selection of plugs...... works and is weather proof though
those are some nice peices for installing injectors too
those are some nice peices for installing injectors too
04-16-07, 10:47 PM
#134
just a thought....
did you ever think about wrapping the DP and/or making a heat shield for the intake manifolds? i understand you coated the DP but the intake tubing looks somewhat thin to me and made me think about heat soak. but then doing both would be just as good, no?
..just a thought
did you ever think about wrapping the DP and/or making a heat shield for the intake manifolds? i understand you coated the DP but the intake tubing looks somewhat thin to me and made me think about heat soak. but then doing both would be just as good, no?
..just a thought
04-17-07, 12:35 AM
#135
oh jesus f**k WOW holy sh*t. I have to get up early tommaorw, just about to go to bed and i seen the topic so of course i click on it and i read every post took about an hour or so and study the pics. WOW WOW WOW this is nuts its amazing.
P.S. Fab a dip stick of some sort
. Your doin one hell of a job. I wanna see some videos of this thing roastn sumthin like a hmm one them supras that put down 1000hp and still run 10s you no them really fast cars that are just superb.
P.S. Fab a dip stick of some sort
. Your doin one hell of a job. I wanna see some videos of this thing roastn sumthin like a hmm one them supras that put down 1000hp and still run 10s you no them really fast cars that are just superb.
04-17-07, 10:32 PM
#140
Rotary Enthusiast
iTrader: (1)
Join Date: Oct 2005
Location: Raleigh, NC
Posts: 1,017
Likes: 0
Received 0 Likes
on
0 Posts
seriously, this forum is the most sarcastic, hardest to please group of automotive guys I can think of. The fact that you have this many people crapping their pants in anticipation for this video/pics is a testiment to how impressive this build is.
Good Job.
Now lets see a video!
BC
Good Job.
Now lets see a video!
BC
04-17-07, 11:16 PM
#143
Senior Member
Thread Starter
Originally Posted by anewconvert
seriously, this forum is the most sarcastic, hardest to please group of automotive guys I can think of. The fact that you have this many people crapping their pants in anticipation for this video/pics is a testiment to how impressive this build is.
Good Job.
Now lets see a video!
BC
Good Job.
Now lets see a video!
BC
thanks man....
04-17-07, 11:31 PM
#144
Senior Member
Thread Starter
well i had my fair of stress last night and this morning getting this thing running....... it ended up being the most simplistic and stupidest thing ever.
I had some problems with the camera and the video for sure, it was recording in some strange format and the quality is shitty, becasue i had to convert it
and only one pic works and that is of the fuel rail finished where i welded on the aluminum fittings
But yeah all in all it runs like a champ and cant wait to drive it, i have vac lines and wires everywhere in the video and that will all be cleaned up tommorrow, as i have to do one brake line and throttle cable before i can drive it.
i am suprised byhow fast the turbo spins at idle..... surley as much or more than what my pt67 did...... and spools free revving to 3.5k alot more than i thought it would
sorry about the quality of the vid again.... the sound and actions are out of time aswell
i am just blipping the throttle to about 3.5k, and i had the timming locked at 5 ATDC too during the vid so that is why it is acting kinda funny, that is with just the 4" dp too
good pics and good vid tommorrow i promise
ha.... no making fun of my ghetto water hoses and clamps either.... those will be changed
I had some problems with the camera and the video for sure, it was recording in some strange format and the quality is shitty, becasue i had to convert it
and only one pic works and that is of the fuel rail finished where i welded on the aluminum fittings
But yeah all in all it runs like a champ and cant wait to drive it, i have vac lines and wires everywhere in the video and that will all be cleaned up tommorrow, as i have to do one brake line and throttle cable before i can drive it.
i am suprised byhow fast the turbo spins at idle..... surley as much or more than what my pt67 did...... and spools free revving to 3.5k alot more than i thought it would
sorry about the quality of the vid again.... the sound and actions are out of time aswell
i am just blipping the throttle to about 3.5k, and i had the timming locked at 5 ATDC too during the vid so that is why it is acting kinda funny, that is with just the 4" dp too
good pics and good vid tommorrow i promise
ha.... no making fun of my ghetto water hoses and clamps either.... those will be changed
04-17-07, 11:36 PM
#145
Rotary Apprentice
Join Date: Jan 2005
Location: USA
Posts: 2,181
Likes: 0
Received 0 Likes
on
0 Posts
its so awesome to see this car come along and see how QUICKLY its coming together. looks great so far! at this rate the car should be running 9's by this saturday!
04-18-07, 12:00 AM
#147
Banned. I got OWNED!!!
Wow I'm incredibly, INCREDIBLY impressed. I haven't even checked on this thread since page 3, and I just spend the last hour reading it. This is record time on a build like this.
04-18-07, 09:17 AM
#149
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 110 Likes
on
93 Posts
Originally Posted by anewconvert
seriously, this forum is the most sarcastic, hardest to please group of automotive guys I can think of.
Originally Posted by zbrown
well i had my fair of stress last night and this morning getting this thing running....... it ended up being the most simplistic and stupidest thing ever.
