View Poll Results: What does everyone think about this cold air intake?
Good
1
1.72%
Sucks
50
86.21%
Maybe
6
10.34%
Other Options ( Reply to thread with other opinions )
1
1.72%
Voters: 58. You may not vote on this poll
*** JDM Cold air intake ***
#1
Rx7 with Civic Si Engine!
Thread Starter
Join Date: Aug 2007
Location: Northern Virginia
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
*** JDM Cold air intake ***
#2
Lives on the Forum
1) Seller is selling bullshit / counterfeit items which are ripping off trademarks like Mugen, AMG, Mazdaspeed, etc.
2) Crap is probably made in China and not from Japan, thus not JDM.
FAIL.
-Ted
2) Crap is probably made in China and not from Japan, thus not JDM.
FAIL.
-Ted
#4
Lives on the Forum
No such thing.
If the car is totally stock, there is no "kit" for a cold air intake.
A true cold air intake would require CUTTING the car up.
Are you willing to do that?
-Ted
If the car is totally stock, there is no "kit" for a cold air intake.
A true cold air intake would require CUTTING the car up.
Are you willing to do that?
-Ted
#5
Rx7 with Civic Si Engine!
Thread Starter
Join Date: Aug 2007
Location: Northern Virginia
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
really? didnt know that, I am willing to do whatever.. but another question, is this one good?
http://www.car-stuff.com/performance...5&skipped=true
http://www.car-stuff.com/performance...5&skipped=true
#6
Senior Member
iTrader: (2)
Join Date: Mar 2004
Location: Charlottesville, VA
Posts: 690
Likes: 0
Received 0 Likes
on
0 Posts
Dude....a cold air intake is not the magic bean to more horsepower. Replacing the stock air box with a cone filter will, at best only yield a small amount of addnl power. The best way to get more power quickly in an N/A is to replace the exhaust system. Racing Beat makes a great system for the RX7.
If you must replace the stock air box with a cone filter, then you should also fab a heat shield box around it to shut out hot engine bay air. Plus you should also probably provide a source of outside air which would mean you might have to cut some holes in the car.
Finally, do some searching and reading on this topic. It has been discussed ad nauseum.
If you must replace the stock air box with a cone filter, then you should also fab a heat shield box around it to shut out hot engine bay air. Plus you should also probably provide a source of outside air which would mean you might have to cut some holes in the car.
Finally, do some searching and reading on this topic. It has been discussed ad nauseum.
#7
is The Whoopieschnootz
Join Date: Apr 2005
Location: Asheville NC
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts
You will almost assuredly lose horsepower with that mod.
Ted is (always) right. The stock air system before the throttle body is in no way shape or form the restriction that you want to remove. It is a well designed, high-enough flowing cold air intake itself.
Almost every system made loses horsepower through several ways.
1)Hot air. Either the system had no heat shield, or the heat shield doesn't seal.
2)Restriction. In the process of getting cold air to the custom air box through such typical means as the brake duct either requires a lot of cutting or a more restrictive setup than stock.
3)Heat Soak. The thick plastic stock intake does a very good job insulating the incoming air from engine bay temps. Any metal piping will heatsoak much more quickly and thoroughly.
A CAI can be made that will increase horsepower, but only the best one imaginable built properly. It will still only net like... 2hp.
Ted is (always) right. The stock air system before the throttle body is in no way shape or form the restriction that you want to remove. It is a well designed, high-enough flowing cold air intake itself.
Almost every system made loses horsepower through several ways.
1)Hot air. Either the system had no heat shield, or the heat shield doesn't seal.
2)Restriction. In the process of getting cold air to the custom air box through such typical means as the brake duct either requires a lot of cutting or a more restrictive setup than stock.
3)Heat Soak. The thick plastic stock intake does a very good job insulating the incoming air from engine bay temps. Any metal piping will heatsoak much more quickly and thoroughly.
A CAI can be made that will increase horsepower, but only the best one imaginable built properly. It will still only net like... 2hp.
Trending Topics
#8
Rotary Enthusiast
iTrader: (1)
Join Date: Aug 2005
Location: Canada
Posts: 1,315
Likes: 0
Received 0 Likes
on
0 Posts
The K&N kit is the best kit you can get. Highest CFM of all filters.
BUT, if you keep it the way you'll lose HP because of heat soak.
You need to build yourself a coldair intake (And isolated box).
BUT, if you keep it the way you'll lose HP because of heat soak.
You need to build yourself a coldair intake (And isolated box).
#9
Rotary Enthusiast
iTrader: (1)
Join Date: Aug 2005
Location: Canada
Posts: 1,315
Likes: 0
Received 0 Likes
on
0 Posts
Example: K&N CAI only gives +/- 2%. But a CAI with a good quality exhaust may put out +/- 3%.
#10
is The Whoopieschnootz
Join Date: Apr 2005
Location: Asheville NC
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts
^^ This is true, but if you're really making the flow through the engine you want more than a CAI. If you're running a big turbo or a bridge or PP setup which will actually want more air than stock can give then you need something like a weber style LIM, custom intake and a CAI on that.
#11
Rx7 with Civic Si Engine!
Thread Starter
Join Date: Aug 2007
Location: Northern Virginia
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Nice, okay, this is what im thinking...
1. New hood with hoodscoop, mostlikely the TII Hood
2. Tube that will connect from the hoodscoop directly to the intake with a filter ofcourse
3. what kind of metal?
4. would i have to buy a square filter and cut that up?
5. Need opinions on making a custom filter.
I can use that on my hood, just cut my hood up, connect a tube that will follow thru the intake with a custom filter. any opinions or suggestions?
1. New hood with hoodscoop, mostlikely the TII Hood
2. Tube that will connect from the hoodscoop directly to the intake with a filter ofcourse
3. what kind of metal?
4. would i have to buy a square filter and cut that up?
5. Need opinions on making a custom filter.
I can use that on my hood, just cut my hood up, connect a tube that will follow thru the intake with a custom filter. any opinions or suggestions?
#14
Rx7 with Civic Si Engine!
Thread Starter
Join Date: Aug 2007
Location: Northern Virginia
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Well, i do not have the stock one n e more, and i was wondering if i do custom cold air intake would help out and air from the hoodscoop would help out.. plus im also gettin ready to add heavy performance parts into it, so i thought i'd start with keeping my engine cool..
#21
Rx7 with Civic Si Engine!
Thread Starter
Join Date: Aug 2007
Location: Northern Virginia
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
haha, No no, i do not have a honda engine on my 7... It was just all these ppol i know have tegs and civics that are barely modified and saying whatever i do with my 7's they're car would be faster.. Although i smoked one of them that was driving a prelude SI, not the new gen, and one of them actually has a pretty fast gsr but couldnt drive worth ****.. n just sumhow wanted to add that on my avatar that i have a civic si engine for fun.. so not TRUE
#22
Rx7 with Civic Si Engine!
Thread Starter
Join Date: Aug 2007
Location: Northern Virginia
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Anyways, has n e one made a custom CAI yet? I researched around this thread and other places couldnt find one,, i found one for FD's though... lol but otherwise, i need opinions on how i shuld make one...
#23
new to the rotary world
hey the milk speed one isnt that just DRYERHOSE??? with a filter on it??? i could make that. i think i should and start up my own business i think i will call it JUICERACING it will be a POSdm part lol jk
#24
Lovin my 7
Well, i do not have the stock one n e more, and i was wondering if i do custom cold air intake would help out and air from the hood scoop would help out.. plus I'm also getting ready to add heavy performance parts into it, so i thought I'd start with keeping my engine cool..
Also I read your explanation of your rx7 with a civic Si motor, but I am still dumbfounded as to what you are getting at or why you would say such a thing... I assure you if the guys here trash people that put Corvette engines into a 7 you certainly don't stand a chance with a civic motor...
Again slow down stop asking questions for a little while and read read read search search search then ask a few questions after you define what you are wanting to do what your intended out come is. Guys like ReTed, are a valued resource here so go through and read some of their posts, listen to every one and accept the criticism, most of the people here will keep you from making huge mistakes and wasting loads of money... I know this is a bit off topic but I think it needed to be said.
#25
Rx7 with Civic Si Engine!
Thread Starter
Join Date: Aug 2007
Location: Northern Virginia
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
as heavy performance, Im putting in Racing beat exhaust, Headers, Port & polish engine, Intake, Probably not going turbo, Suspension is what im going to be doign next, then replace Stock Radiator, and many other things im too lazy to list..