My RX7
#1
Thread Starter
Full Member
iTrader: (1)
Joined: Jul 2007
Posts: 67
Likes: 0
From: Prague (Czech Republic)
My RX7
Itīs a 1987 N/A sport
Engine: 18000km after full rebuilt
Street port
KN air filter with hand made shield
Headers
Custum built exhaust with two resonators (loud as f***)
Suspension: original TurboII with custom upper for more camber ( soon will be replaced with JIC FLT-FAS )
Interior: Completly stock
Exterior: EVO9 wheels (17x8 ET18 after 20mm spacers)
Engine: 18000km after full rebuilt
Street port
KN air filter with hand made shield
Headers
Custum built exhaust with two resonators (loud as f***)
Suspension: original TurboII with custom upper for more camber ( soon will be replaced with JIC FLT-FAS )
Interior: Completly stock
Exterior: EVO9 wheels (17x8 ET18 after 20mm spacers)
#4
i want your tail lights.
man, those euro cars are a crazy hybrid of fc models...
jdm folding mirrors, us-spec ftp's, euro side marker, left side drive, jdm/euro steering wheel, euro tail lights, sport spoiler, no marker light in the rear moulding and back seats.
man, those euro cars are a crazy hybrid of fc models...
jdm folding mirrors, us-spec ftp's, euro side marker, left side drive, jdm/euro steering wheel, euro tail lights, sport spoiler, no marker light in the rear moulding and back seats.
Trending Topics
#13
Thread Starter
Full Member
iTrader: (1)
Joined: Jul 2007
Posts: 67
Likes: 0
From: Prague (Czech Republic)
I went for a small photoshoot yesterday, after day spent with polishing a waxing. Also some changes from last, I have D2 coilovers, SuperNow camber link, Energy PU bushing, EBC turbo groove front brake discs with EBC pads on all four corners, S5 tails and some other bits like braided clutch line with new Clutch master and slave cylinder.
#18
Thread Starter
Full Member
iTrader: (1)
Joined: Jul 2007
Posts: 67
Likes: 0
From: Prague (Czech Republic)
Time for update, since last post (year ago...) some changes. Off with D2 and replaced with HSD HR alot better. Carbing front strut tower, goodrdige brake lines, Nardi steering wheel, Racing beat complete exhaust (header, pre-silencer, y-pipe, mufflers), ACT hdss clutch kit and last Koyo 56mm radiator.
some pics
and recent shot
some pics
and recent shot
#24
Thread Starter
Full Member
iTrader: (1)
Joined: Jul 2007
Posts: 67
Likes: 0
From: Prague (Czech Republic)
shampoop: i'm running 225/45/17 all round, up front i'm using stock lug studs only with 5mm spacers and in the rear 20mm spacers with their own studs
Silverfc88: Thanks, even more from someone whose car is my perfect example
I wanted to go to Eurotary in Netherlands to say hello, but didn't have money since a had some troubles with 7..like dead clutch..
Silverfc88: Thanks, even more from someone whose car is my perfect example
I wanted to go to Eurotary in Netherlands to say hello, but didn't have money since a had some troubles with 7..like dead clutch..
Thread
Thread Starter
Forum
Replies
Last Post