i haz efan for yoU!
|
serious? damn.... im guna have asticker made that says" FOR HIMEH!" and rock it on my car muahahha
|
stock clutch fan would be better for a fmic application..
i had a flexalite in my s13 during my KA days.. then went to a SR with FMIC, and the flexalite, would overheat in the summer traffic.. had to switch to a clutch fan.. eventually i went ford tuarus fan and no more problems |
i haz ford tarus E-fan!! FTW
thats what im talking about.. you wants to buy that too along with ecu and harness? haha DO IT DK!!!! i wanna see it! |
yo ican head down tmrw morn ing around 10-11 maybe?
|
alright sho, hope its works for ya!
|
himeh saved my life ! haha im not down to put that in my sig?
|
alrite..Since im picking up rotors this saturday, my engine build should be done by sunday. So for now im prepping the engine bay... I started unpluging all the shitz and removing the headers[the exhaust piping is stripped stuck on the header] so i have to remove the manifolds as well to get to it... yeah pulling the NA tmrw...
gota clan my garage for more space first.. http://img.photobucket.com/albums/v6...k/P1020231.jpg http://img.photobucket.com/albums/v6...k/P1020236.jpg say bye bye to NA... guna start hacking away holes for the IC piping tmrw.. and relocate the battery.. |
anybody know if the Kragen MIG welders are any good?? They sell for like $150..iono myfriends say they might be crap.. anyone tried them before? would it be good enough to weld the IC piping?
Oh yeah thats my 3 sectional staff from back when I was into martial arts lol.. Now its a hood stand !!!! yeeee gangsta |
Just take it somewhere and have it welded. If its small enough some places wont even charge you. Unless you want to get good at welding to make more stuff, a welder really isnt worth buying.
|
Originally Posted by dkwasherexd
(Post 8641615)
anybody know if the Kragen MIG welders are any good?? They sell for like $150..iono myfriends say they might be crap.. anyone tried them before? would it be good enough to weld the IC piping?
Oh yeah thats my 3 sectional staff from back when I was into martial arts lol.. Now its a hood stand !!!! yeeee gangsta |
DK, hit me up before you drive down to SD.
i got your seatbelt harness thingy from jason. |
yo kent pm me ur numba !! Motor is out... trying to find something to cut the engine bay to fit IC piping through....
|
get a angle grinder from harbor frieght
http://www.germes-online.com/direct/...le_Grinder.jpg |
how much do one of those things run? lol damn maybe ican find someone to borrow one..
|
http://www.harborfreight.com/cpi/cta...emnumber=91223
and get a metal cut off wheel for it.. they come in handy when you need to cut metal too Easy to cut straight lines... If your wanting to cut circles.. then i dont know what to use.. Just cut squares |
go to home depot and look in the door section , look for circular door knob bits
they are made for wood but will last you long enough to do both sides http://ecx.images-amazon.com/images/...500_AA280_.jpg |
i haz tools for you meng@!
|
Whats up with all the graffiti in the engine bay man? Never seen that before. :dunno:
|
cool thx guys.
it isnt grafiti, well maybe some is. But after i sprayed my engine bay All my friends just tagged and signed in there before dropping in my 3rd engine. lol its something different haha. I guess where ever I go, I have a piece of my friends to always remember, kinda like a year book where u have everyone sign. |
http://img.photobucket.com/albums/v6...k/P1020238.jpg
RIP the third 13b engine :( perhaps ill ressurect it later on.. Picking up rotors from teddy this saturday, so I should be done building the 13bt on sunday, then drop it in on monday I hope... |
Originally Posted by El Nene 7
(Post 8644098)
go to home depot and look in the door section , look for circular door knob bits
they are made for wood but will last you long enough to do both sides http://ecx.images-amazon.com/images/...500_AA280_.jpg |
yeah it will work with a regular drill, aas far as piping go how big are you running for the fronts because it pretty hard to find 3" circular cutters i think the ones they sell at home depot are between 1"-2.5"
either way just cut them out and then it will be easier for you to make the holes bigger with a file or a dremel goodluck also for your piping call pm teddyrx2 at 1231 motorsports they do sick ass welding and fabrication |
cool got it cutout today.. I just found out the couplings I have are too small for the Intercooler2.25", but the right size for the piping 2" its hard to stretch the coupling to fit, but ill find some conversion coupling from samco...
|
2 inch intercooler piping? i would at least go 2.5
|
All times are GMT -5. The time now is 05:39 PM. |
© 2024 MH Sub I, LLC dba Internet Brands