lownclean

Looking for options on extended lug studs and lug nuts. If your running them on your FC post what brand lugs and studs your running and post pics if you have any.

iani1.1

iTrader: (13)

just save yourself the trouble and buy ARP studs

lownclean

Do you know the sizes cause I found two different sizes for the studs does anyone know if either are right or if its a different size?

Wheel Bolt Knurl Dia. : 12.9 mm
Wheel Bolt Thread Size : M12-1.5

Wheel Bolt Knurl Dia. : 13.08 mm
Wheel Bolt Thread Size : M12-1.5

papiogxl

iTrader: (6)

ARP 100-7708 are the 2.5" long ones.

These are the lug nuts I got, they were recommended by another member in a thread a long time ago.
https://appliedracingtechnology.ipow...p?productid=50

iani1.1

iTrader: (13)

do you have a 4 or 5 lug? but 2.5 are a bit much imo.

lownclean

I have a 5 lug from a turbo car

iani1.1

iTrader: (13)

i didnt see this post for some reason. meh get those ^^

Renton

iTrader: (17)

ARP studs and these lugnuts



http://www.evasivemotorsports.com/Me...t_Code=BC01-LN

lownclean

Everyone agrees that the part number listed above is the correct arp #

RotaryThunder

I have 3.25 all the way around n Blox blue lug nuts. Cant seem to find my pic. Post if I find. Have a set of those BC ones too from previous car. Like them both. Rays has awesome ones but freakin expensive cuz they dont damage the wheels and have locks that go into them.

iani1.1

iTrader: (13)

i rock the autoexe but theyre closed. im sure they sell open ended ones.

lownclean

I did some research to day and here is what ive found

Front OE part# H001-26-113 (Knurled Diam. 13.08mm or .514")
Rear OE part# FB05-26-113A (Knurled Diam. 12.9mm or .507")

ARP doesn't seem to have anything for the front
ARP makes ones for the rear Part# 100-7719 (Knurled Diam. 12.9mm or .507")

Hey papiogxl are you sure you ran the Part# 100-7708 all the way around the knurled diam. on that part number is .509" (Im sure you could press that into the rear but it would be loose in the front)

iani1.1

iTrader: (13)

the fronts should be the same diameter as the rear.

nofords

iTrader: (9)

ARP Studs for Corvette

3.25" up front (100-7713)
2.5" out back (100-7708)

Using the above lugs you will have the same amount of length off the rotor face both front and rear

Gorilla Spline open ended lug nuts for my thick flange wheels. Std. Open ended lug nuts wont fit.

lownclean

I just want stronger studs and the length is more for looks to be honest