RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Non-Technical and pictures (https://www.rx7club.com/2nd-generation-non-technical-pictures-198/)
-   -   Akagi White Comet (https://www.rx7club.com/2nd-generation-non-technical-pictures-198/akagi-white-comet-761615/)

SpideyFan6010 08-02-08 07:28 PM

Cbed
 
A few more to add to the list

rotarybeat1287 08-02-08 07:39 PM


Originally Posted by CyborgRyu (Post 8433250)
I was thinking the same thing, I should get a black FC and put a LED light bar on it.

...you know those 3rd brake lights on 240sx coupes? haha. Put one of those in the hood scoop of a TII and your set. Believe me, beer entered my system and I used to think of that for a good laugh. lol.

SpideyFan6010 08-04-08 09:51 AM

Seats and safety equipment
 
Any know any good brands for seat and safety equipment?

CyborgRyu 08-04-08 01:19 PM

Bride.

rksti89 08-04-08 04:45 PM

how about some enfini seats lol those are sick factory seats. :]

i've always wondered if im spelling it right. is it infni or enfini rx7??

87 t-66 08-04-08 05:29 PM


Originally Posted by rksti89 (Post 8438455)
how about some enfini seats lol those are sick factory seats. :]

i've always wondered if im spelling it right. is it infni or enfini rx7??

infini = fc

efini = fd

i cant believe this thread is still alive.

rksti89 08-04-08 10:43 PM


Originally Posted by 87 t-66 (Post 8438581)
infini = fc

efini = fd

i cant believe this thread is still alive.

ok thanks :]

and yeah im a bit surprised too but not much because im waiting for zooks to get back to sell us some stuff from his sponsors :D haha

SpideyFan6010 08-04-08 10:45 PM


Originally Posted by 87 t-66 (Post 8438581)
infini = fc

efini = fd

i cant believe this thread is still alive.

I like it when people waste their time to post on a thread they hate. Plus I like Stewie counting the money :peace:

wandering man 08-06-08 08:25 PM

Every white tII FC should have a red suns decal on it

Initial D rocks!

rksti89 08-07-08 02:51 AM


Originally Posted by wandering man (Post 8445540)
Every white tII FC should have a red suns decal on it

Initial D rocks!

idk know about every white one, especially with the decal...but every white tII with a feed front lip sounds good to me :D :icon_tup:

SpideyFan6010 08-07-08 03:02 AM


Originally Posted by rksti89 (Post 8446423)
idk know about every white one, especially with the decal...but every white tII with a feed front lip sounds good to me :D :icon_tup:

:icon_tup:

ZOOKFC3S 08-07-08 12:22 PM

Rofl... im heading to shop today to see whats up and i will see if i can get parts.. and ima try and get some Dampa-chi toys ^^ ahahh i will keep you guys posted :D

SpideyFan6010 08-07-08 01:28 PM


Originally Posted by ZOOKFC3S (Post 8447230)
Rofl... im heading to shop today to see whats up and i will see if i can get parts.. and ima try and get some Dampa-chi toys ^^ ahahh i will keep you guys posted :D

SWEET!!!

wandering man 08-07-08 07:50 PM


Originally Posted by rksti89 (Post 8446423)
idk know about every white one, especially with the decal...but every white tII with a feed front lip sounds good to me :D :icon_tup:

Fair enough:icon_tup:

rksti89 08-08-08 04:58 AM


Originally Posted by wandering man (Post 8448566)
Fair enough:icon_tup:

yeah!!!....front lips always beats anything!! well at least in my arguments over the fc :D

and ZOOK...whats happening with the little trip you took to the shop, anything cool :] or is it going to be :icon_tdow

ZOOKFC3S 08-08-08 12:36 PM

Well when i went yesterday... Ian , who is the brains of the operation of my car went to a race event back east and will be back Monday or so and i saw that they put my Engine in my car. I couldnt see it fully because it was on the Rack way up and i noticed that the wiring harness made everything look nasty... They said once the engine was in they would start tucking wires away so all that is left is straight up motor... as far as parts go.. i gotta wait Till Ian comes back cause iono where he puts them hahahhaaa.. i will deff keep you postes ^^

rksti89 08-08-08 12:50 PM


Originally Posted by ZOOKFC3S (Post 8450119)
Well when i went yesterday... Ian , who is the brains of the operation of my car went to a race event back east and will be back Monday or so and i saw that they put my Engine in my car. I couldnt see it fully because it was on the Rack way up and i noticed that the wiring harness made everything look nasty... They said once the engine was in they would start tucking wires away so all that is left is straight up motor... as far as parts go.. i gotta wait Till Ian comes back cause iono where he puts them hahahhaaa.. i will deff keep you postes ^^

awesomeness :D i cant wait :icon_tup: haha

SpideyFan6010 08-08-08 02:53 PM


Originally Posted by ZOOKFC3S (Post 8450119)
Well when i went yesterday... Ian , who is the brains of the operation of my car went to a race event back east and will be back Monday or so and i saw that they put my Engine in my car. I couldnt see it fully because it was on the Rack way up and i noticed that the wiring harness made everything look nasty... They said once the engine was in they would start tucking wires away so all that is left is straight up motor... as far as parts go.. i gotta wait Till Ian comes back cause iono where he puts them hahahhaaa.. i will deff keep you postes ^^

This is great news!!!

SpideyFan6010 08-10-08 11:13 PM

Intercooler
 
Of the three positions which would render the most performance. TMIC,V-Mount IC, or FMIC. I heard a lot of mixed things and I am not certain so it would be nice to hear other peoples opinion. Since, it is impossible to determine that Ryosuke has a FMIC I want to get the one that will benefit my car the most.

ZOOKFC3S 08-11-08 11:09 PM

*ppsssttt**pssstttt* - V-mount ^^ hahaha

K!NCH 08-11-08 11:44 PM

I agree with ZOOK a V-Mount would be sweet. Not sure of the perfromance difference. But I personally like the Front-Mount.

BurntOrangeT2 08-11-08 11:54 PM

in any case ry's car looks perfect & there were no N/A 7's in japan

SpideyFan6010 08-12-08 05:41 AM


Originally Posted by ZOOKFC3S (Post 8459055)
*ppsssttt**pssstttt* - V-mount ^^ hahaha

Is their V-mount kits available by brands like the FMIC? I heard their isn't any in the FC model and to get a V-Mount it has to be custom made.I don't think I have enough skill yet to make my own pipes and such.

Zenki FC3S 08-12-08 11:34 AM

a V-mount has to be fabbed in, and requires a vented hood(not a scoop). as for FMIC, the Small Isuzu NPR intercooler is perfect, the endtanks wrap around the radiator and run straight to the turbo and manifold. it also sits flush to the rad and doesnt cause any turbulance between the two. i have a few NPR's for sale

ZOOKFC3S 08-14-08 03:38 AM

Lol why do so many peps hate on People just trying there hardest to make there car like Ryosuke..? is it cause there jealous? and because there 7 is boring gay looking? hahaha i mean im not trying to be a A!@ but i totally think its awsome that people do what they think is kool and F!@$% every 1 else who thinks its gay.. its not there car and if you think that your car is gay just because others say so then i have no clue what to say but.. when i bought my FC a while back.. yes i wanted to be like Ryosuke.. its true.. he was a role model.. he had the Ladies, the Brains, The driving skills, etc.. but i love my car and so do other peps ahaha. im not trying to please people and im not trying to get into magzines.. i just love showing people that i can to be like Ryouske ^^ Initial D is the Shitzz.. it just sux that people like the post above me have to poop on other peps dreams of cusotmizing there car the way they want to... what a shame for those peps.. sigh -_____-

oh wellz tho ! haha


All times are GMT -5. The time now is 12:15 PM.


© 2024 MH Sub I, LLC dba Internet Brands