What 20b "#" do you have?
03-14-06 | 11:27 PM
#201
Thread Starter
Rotary Freak
iTrader: (1)
Joined: Apr 2001
Posts: 1,825
Likes: 1
From: alberta, canada
it was only the 20b's that had the series numbers on them.
as for the R is there any where on the rotor housings that have a F
R = rear and the F= front
matt
as for the R is there any where on the rotor housings that have a F
R = rear and the F= front
matt
Originally Posted by RotorMotor2
Well, I looked today for stamps and there were none anywhere but the front plate serial which is not similar to the one you guys are talking about for series numbers, but if you could help me that would be good for when I shop for new engines again.....
The serial # on the front cover of the Blown 13BRE engine in my car that has the areas needed to drill and tap for the FD mounts and front cover is:
E097864
This engine has a "R" stamp on the front rotor housing and I could not see the rear housing, I know this stands for "Rear" but because it is on the front housing does this mean that it has been rebuilt with a "Rear" housing on the front?
The serial # on the front cover of the replacement 13BRE engine that DOES NOT have the metal material needed for me to drill and tap for the FD mounts and front cover is:
E064905
This engine has a "R" stamp on the front AND rear rotor housing, does this also mean that it has been rebuilt because the "Rear" housing is on the front?
Thanks,
Jeremy
The serial # on the front cover of the Blown 13BRE engine in my car that has the areas needed to drill and tap for the FD mounts and front cover is:
E097864
This engine has a "R" stamp on the front rotor housing and I could not see the rear housing, I know this stands for "Rear" but because it is on the front housing does this mean that it has been rebuilt with a "Rear" housing on the front?
The serial # on the front cover of the replacement 13BRE engine that DOES NOT have the metal material needed for me to drill and tap for the FD mounts and front cover is:
E064905
This engine has a "R" stamp on the front AND rear rotor housing, does this also mean that it has been rebuilt because the "Rear" housing is on the front?
Thanks,
Jeremy
03-15-06 | 01:21 AM
#202
Passenger
Posts: n/a
no, just what you see in the third picture above, only an "R" on each.... I know that F=front C=center and R=rear but does that mean that i have 2 rear rotors on both engines? on the 13BRE could it be possible that there is no differences in the housings so they just use "R" housings for it?
03-20-06 | 12:39 AM
#204
Passenger
Posts: n/a
but you got a 13BREW engine, both of my 13BRE engines have "R" (rear rotor housings) on the front and rear when i got them from the importer..... hmmmm does all 13BRE engines use the same porting and specs so they just use the "R" for both when they build them?
