20BEAST FD build.
09-11-15, 11:20 PM
#203
was it hard to mold the inconel shield for the LIM? I have downpipe already on.. I have like 1" spacing between the downpipe and the LIM. wanted to see if I could do it without taking off the downpipe which would require taking engine mounts off for my setup.
how big was your inconel shield?
how big was your inconel shield?
09-12-15, 03:37 AM
#204
was it hard to mold the inconel shield for the LIM? I have downpipe already on.. I have like 1" spacing between the downpipe and the LIM. wanted to see if I could do it without taking off the downpipe which would require taking engine mounts off for my setup.
how big was your inconel shield?
how big was your inconel shield?
Iiterally wedged it in there. With the blanket its pretty tight but well protected from heat now.
09-28-15, 11:54 AM
#205
Nothing but good news. Been very busy but found time to finish the Coil on plug system, wired up the engine harness and fired it up on friday.
I had a bad fuel check valve in one of the fuel pumps but aeromotive quickly and professionally took care of the issue and overnighted me a pump thursday night.
I just need to put the car together at this point and enjoy it.
I have yet to even plug in the laptop. The basemap I had loaded onto the aem infinity started the no problem
I had a bad fuel check valve in one of the fuel pumps but aeromotive quickly and professionally took care of the issue and overnighted me a pump thursday night.
I just need to put the car together at this point and enjoy it.
I have yet to even plug in the laptop. The basemap I had loaded onto the aem infinity started the no problem
09-29-15, 10:53 AM
#211
That's fantastic.
I've been in the middle of my 20b build for 8 years and find myself nearly ready to move on and just buying something I can drive.
Then I watch these various build threads and hear them start. Mmmmm.
Thanks for the motivation!
I've been in the middle of my 20b build for 8 years and find myself nearly ready to move on and just buying something I can drive.
Then I watch these various build threads and hear them start. Mmmmm.
Thanks for the motivation!
10-02-15, 05:19 PM
#218
Rotary Freak
Join Date: Jan 2002
Location: Overland Park, KS
Posts: 2,360
Likes: 0
Received 0 Likes
on
0 Posts
Did you source that from a site or contact him directly? I see references to the kit on other forums, but no links to product pages. Also, did you have the coils and paired what he manufactured or buy it all as one?
10-05-15, 02:18 AM
#222
Yea he photobombed a good shot.
As for the wheels they are NOT chrome. Dont know why everyone says that. No different from a set of ccw classics.
They are billet Jline racing 2 piece 17's. Pretty expensive wheel and weighs very little. Non the less the aluminum look is getting old for myself as well. Im actually going to paint them satin black center and gloss lips.
As for the wheels they are NOT chrome. Dont know why everyone says that. No different from a set of ccw classics.
They are billet Jline racing 2 piece 17's. Pretty expensive wheel and weighs very little. Non the less the aluminum look is getting old for myself as well. Im actually going to paint them satin black center and gloss lips.
10-05-15, 02:42 AM
#223
Yea he photobombed a good shot.
As for the wheels they are NOT chrome. Dont know why everyone says that. No different from a set of ccw classics.
They are billet Jline racing 2 piece 17's. Pretty expensive wheel and weighs very little. Non the less the aluminum look is getting old myself as well. Im actually going to paint them satin black center and gloss lips.
As for the wheels they are NOT chrome. Dont know why everyone says that. No different from a set of ccw classics.
They are billet Jline racing 2 piece 17's. Pretty expensive wheel and weighs very little. Non the less the aluminum look is getting old myself as well. Im actually going to paint them satin black center and gloss lips.
10-05-15, 04:47 PM
#225
I sold all my old school cars. Rx3 was the green one in the pic and sold my cosmo.
I loved your build man! Thats what I want to build next and either 4 rotor power it or a na 20b monster. I would love to do a 6 rotor but i dont think it would fit.
Im planning on attending sevenstock next year.
I loved your build man! Thats what I want to build next and either 4 rotor power it or a na 20b monster. I would love to do a 6 rotor but i dont think it would fit.
Im planning on attending sevenstock next year.