TITLE SAYS IT ALL

 

I forgot its a gslse

 

T'ed into the oil pressure gauge feed wire, it smooths the gauge motion, I have tested with and without, and am unable to tell the difference.

Isaac

 

That's a capacitor, normally it sit around your distributor for smoothing out the ignition spikes out.

 

That's a capacitor that suppresses radio interference from the electrical systems so you don't get buzzing in your radio. It sits on top of the engine behind the rat's nest just in front of the fire wall.

If you look carefully you can see it on the right side of this photo (85 GSL)

 

An -se makes it an 84 or 85. From the FSM we get this:




The one for ignition smoothing is usually right at the dizzy IIRC



Isaac

 

How good to know then, that's why they have 2 kind of condensers in de Mazda catalog.

 

You Guys are Good!!

I tell you, there is no better group on this board than the 1st gen section.

 

It's the easiest model of the 3.

 

thank you people you guys are the best.