rotarycrazy

iTrader: (8)

the day has come my SA is finally back on the road for those who dont know I had a bad electrical issue with the car the main power wire that goest to the starter had quite a few cracks in it and it was grounding out so there for it fried all the wires in the car. After failed attempts to fix the problem I just gave up bought a 81 parts car and swaped every wire out of it into my SA and finally it runs once again it was so much fun driving it after more than 3 months of it sitting in the garage. Now heres a question I have a wheel rubing sounds like metal to metal in the back pasenger side when ever I make a sharp left hand turn any ideas and also how hard is it to change the wheels barings in the rear axle.

Also my thanks goes to Greg for helping me out when ever I could not put the two wire end together.

Rx-7Doctor

iTrader: (13)

Good to hear shes back on the road.

Wheel bearings make a whirring noise and if bad will make this noise as you are driving straight, not when turning.

Since I changed the title of your thread(makes a big difference when you title it for what the problem is) if you now scroll down to the end of the screen you will see 5 more related threads!