wheel 13" upgrade
#1
Full Member
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: May 2002
Location: ITALY
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
wheel 13" upgrade
Hi friends, i am the owner of a FIRST EDITION RX7 MAZDA, standard she mount the (rim) 13" wheel , but i want upgrade it to .. maibe rim of 15"? .. no body from yuo have do that?
and for the omologations of the wheel mazda have give you?
i m from italy.. bye!
and for the omologations of the wheel mazda have give you?
i m from italy.. bye!
Last edited by Scruch; 10-09-02 at 02:38 PM.
#3
Senior Member
![](https://www.rx7club.com/images/misc/15_year_icon.png)
iTrader: (4)
Join Date: Feb 2001
Location: Richmond, KY
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
It depends. Alot of the European Spec cars were actually set up with SE suspensions on them.
What style of factory wheels are on it? If it's the rotor style, then they are 4x110.
If they are the phone dial style, then they are SE. I think the pattern is 4x4.5
Those are the only 2 factory style that I saw while living in Germany.
As Mike P-28 stated, if they are SE style, you have a large variety, anywhere from 14"-18". If the other, pretty much limited to Panasport or ROH.
But just guessing, if you have 13" you probably have 4x110.
What style of factory wheels are on it? If it's the rotor style, then they are 4x110.
If they are the phone dial style, then they are SE. I think the pattern is 4x4.5
Those are the only 2 factory style that I saw while living in Germany.
As Mike P-28 stated, if they are SE style, you have a large variety, anywhere from 14"-18". If the other, pretty much limited to Panasport or ROH.
But just guessing, if you have 13" you probably have 4x110.
#4
There must be some kind of confussion here...I just spoke o the people of www.1stopcustomwheels.com out of CA and they offer me more than a 100 styles fitting the 4x100 pattern. Could this be a mistake?
#5
Originally posted by a1670
There must be some kind of confussion here...I just spoke o the people of www.1stopcustomwheels.com out of CA and they offer me more than a 100 styles fitting the 4x100 pattern. Could this be a mistake?
There must be some kind of confussion here...I just spoke o the people of www.1stopcustomwheels.com out of CA and they offer me more than a 100 styles fitting the 4x100 pattern. Could this be a mistake?
Last edited by MIKE-P-28; 10-09-02 at 06:43 PM.
Trending Topics
#8
....false alarm guys .....just spoke to the salesman again and he said that it was mistake and that I will need adapters.........Fu$#@^&^%!!!!!! Whre the hell do I get this adapters from?
#10
Full Member
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: May 2002
Location: ITALY
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Hi all!
my car is a rx7 of the year 1981 and have on the 13" very very little...
my car is only omologated to 13" the original one.. and they have say me that mazda dont omologat more auto out of production..
what i must do ?
my car is a rx7 of the year 1981 and have on the 13" very very little...
my car is only omologated to 13" the original one.. and they have say me that mazda dont omologat more auto out of production..
what i must do ?
![Frown](https://www.rx7club.com/images/smilies/frown.gif)
Thread
Thread Starter
Forum
Replies
Last Post