what are some good sites for wheels?
03-12-02 | 07:17 PM
#1
Thread Starter
Full Member
iTrader: (1)
Joined: May 2001
Posts: 139
Likes: 0
From: annapolis, maryland, united states
what are some good sites for wheels?
I would like to buy some new wheels for my 85 gs, but the only ones that i can find are the two on tirerack, anywhere else I should try?, oh yea, what is the lug pattern anyway?
Last edited by redrx; 03-12-02 at 07:35 PM.
03-13-02 | 01:46 AM
#3
Are you Nucking Futs?
Joined: May 2001
Posts: 1,235
Likes: 0
From: Abilene, TEXAS
group a autotrend has one or two styles of ROH's in 4x100mm bolt pattern. diamond racing sells steel wheels for our 12a's. Panasport and Revolution have fitments also. Try here and thepartstrader.com for used wheels. Then there is the custom route. expensive but they will sell you any size any bolt pattern, simmons, HRE, fisk, ect.
03-13-02 | 02:25 PM
#4
hey redrx I am in the same boat you are. Mazda fucked us when they made the rex have a 4x110 mm pattern. Yer gonna find that just about nothing will fit your car. Panasports are good but a $250 a piece they are outrageously expensive. I still don't know what I'm going to do. try to find a set of panasports used or something.
03-13-02 | 04:38 PM
#7
Originally posted by yayarx7
I would suggest a GSL-SE suspention swap to anyone with a 12a car. its fairly easy, can be fairly inexpensive and you get, bigger brakes, a normal bolt pattern, LSD.
Just my opinion.
I would suggest a GSL-SE suspention swap to anyone with a 12a car. its fairly easy, can be fairly inexpensive and you get, bigger brakes, a normal bolt pattern, LSD.
Just my opinion.
parts car.
It has the Full SE Suspension and Brakes,
and a fair body. (Needs good paint, not wrecked)
No engine/No Tranny.
SE Wheels in good condition too.
Interior has torn burg leather
Center console is out, gauge cluster is out.
Basically it's good to make a Race car out of,
or build up up the car.
Miami Area
Trending Topics
03-13-02 | 08:20 PM
#8
Full Member
Joined: Jul 2001
Posts: 131
Likes: 0
From: Raleigh
True, you could do a SE swap. However, if you have a 84 or 85 GSL, whats the point? All you get is the different bolt pattern. I dont see a reason to do all that just so you can get nicer rims. I mean, id just try to clean up the stock ones or get some LE wheels.
03-14-02 | 01:09 AM
#10
Are you Nucking Futs?
Joined: May 2001
Posts: 1,235
Likes: 0
From: Abilene, TEXAS
Originally posted by TheAMAZINGNorad
True, you could do a SE swap. However, if you have a 84 or 85 GSL, whats the point? All you get is the different bolt pattern. I dont see a reason to do all that just so you can get nicer rims. I mean, id just try to clean up the stock ones or get some LE wheels.
True, you could do a SE swap. However, if you have a 84 or 85 GSL, whats the point? All you get is the different bolt pattern. I dont see a reason to do all that just so you can get nicer rims. I mean, id just try to clean up the stock ones or get some LE wheels.
