Were can i buy camber plates for Cheap?
10-26-05, 04:50 PM
#55
First run batch of parts are in and everything worked out as suspected. We have 4 sets of these first run batch that are accounted for (PM's have been sent to those of you). If you guys want a group buy on these let me know and I will set it up.
We currently offer plates for Rx3, 1st generation and 2nd generation. These use the standard 5/8 (.625) bearing that all camber plates on the market use. If orders are placed you will need to let us know what spec shock you will be running so we can ship the appropriate spacer with the kit. All hardware for mounting is included, there are thrust bearings with the kit as well they are just not pictured.
-billy
We currently offer plates for Rx3, 1st generation and 2nd generation. These use the standard 5/8 (.625) bearing that all camber plates on the market use. If orders are placed you will need to let us know what spec shock you will be running so we can ship the appropriate spacer with the kit. All hardware for mounting is included, there are thrust bearings with the kit as well they are just not pictured.
-billy
10-26-05, 06:18 PM
#56
Microtech Tuning!
Join Date: Feb 2002
Location: 626 Socal
Posts: 1,828
Likes: 0
Received 0 Likes
on
0 Posts
Please set up the group buy asap! I've been needing camber plates since before I've had my car 
BTW, if I intend to use the camber plates with my current Tokico blue shocks, and then in a couple months build a coilover setup using Tokico Illumina's, then do I just remove the spacer provided in order to fit with the Illumina's? Also, will I need an upper spring perch either for stock "style" springs or with 2.5" ID springs?
BTW, if I intend to use the camber plates with my current Tokico blue shocks, and then in a couple months build a coilover setup using Tokico Illumina's, then do I just remove the spacer provided in order to fit with the Illumina's? Also, will I need an upper spring perch either for stock "style" springs or with 2.5" ID springs?
10-26-05, 09:50 PM
#58
Rotary Enthusiast
iTrader: (14)
Join Date: May 2004
Location: Drifting a Roundabout near you!
Posts: 1,366
Likes: 0
Received 10 Likes
on
10 Posts
Billy, do these have incriments notched in for repeatable changes to settings? Also, if possible, i would like mine with no powder coating, want to do custom color(the car is black).
Thanks again.
Thanks again.
10-27-05, 07:47 AM
#59
Originally Posted by Slammed_GSL
Billy, do these have incriments notched in for repeatable changes to settings? Also, if possible, i would like mine with no powder coating, want to do custom color(the car is black).
Thanks again.
Thanks again.
Sure I can leave yours bare.
-billy
10-28-05, 02:43 PM
#62
11-11-05, 01:00 AM
#66
Senior Member
Join Date: Jul 2004
Location: Delhi, CA
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
caster camber plates
Has anyone tried the K-MAC plates? See k-mac.com part number 481116J b/c
I had a look at a display unit at the SEMA show and they seem to be well made. They did not have the specific unit for a first gen at the show. It appears they will handle a substantial range of castor/camber. Even greater if you go to coil overs.
Dennis L. Cote, Delhi, CA
I had a look at a display unit at the SEMA show and they seem to be well made. They did not have the specific unit for a first gen at the show. It appears they will handle a substantial range of castor/camber. Even greater if you go to coil overs.
Dennis L. Cote, Delhi, CA
Thread
Thread Starter
Forum
Replies
Last Post
