Weber, HELP ASAP
#1
Full Member
Thread Starter
Join Date: May 2002
Location: Miinnesota
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Weber, HELP ASAP
Ok, just got my weber from rotaryshack. Started it up and ran sweet as hell!!! only problem is, how do i hook up the throttle cable??? Do i need to make a new bracked to hold the cable sleeve???? Pics would be nice, but anything is appreciated! thanks much
#4
Full Member
Join Date: Mar 2002
Location: asheville nc
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
i know this has nothing to do with your problem.. but i was wondering if your buying exp from rotaryshack was a plesent one? ? cause i'm thinking of buying a 13b motor and tranny from then... sorry just had to ask
thanks
Cory
thanks
Cory
#5
Hunting Skylines
Join Date: Apr 2001
Location: Brisbane, Queensland, Australia.
Posts: 3,431
Likes: 0
Received 4 Likes
on
3 Posts
Originally posted by RoTARY-ReX
ok, i just made a bracket, so nevermind that question.. But now my gas pedal is extremely loose... what can i do??
ok, i just made a bracket, so nevermind that question.. But now my gas pedal is extremely loose... what can i do??
#6
Full Member
Thread Starter
Join Date: May 2002
Location: Miinnesota
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
My expierience buying from RotaryShack was pleasant!! Robert was very helpful in my MANY questions... On to the next thing... Does anyone know where the adjustment screws are on a 45 DCOE carb??
Trending Topics
#8
Full Member
Thread Starter
Join Date: May 2002
Location: Miinnesota
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
The vendor has supported me in every way possible. He has been very helpful and had answered many many questions. I just needed to ask you all a few questions... What screws tune what, and why my pedal is so lose...
#12
Full Member
Thread Starter
Join Date: May 2002
Location: Miinnesota
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
One last question, when i hit my gas pedal, the carb will not return to idle.. is like the cable is sticking.. the cable slides very easily.. it seems the throttle linkage bracket is not strong enough to return to idle.. any ideas? can it be adjusted?
#13
Hunting Skylines
Join Date: Apr 2001
Location: Brisbane, Queensland, Australia.
Posts: 3,431
Likes: 0
Received 4 Likes
on
3 Posts
Originally posted by RoTARY-ReX
One last question, when i hit my gas pedal, the carb will not return to idle.. is like the cable is sticking.. the cable slides very easily.. it seems the throttle linkage bracket is not strong enough to return to idle.. any ideas? can it be adjusted?
One last question, when i hit my gas pedal, the carb will not return to idle.. is like the cable is sticking.. the cable slides very easily.. it seems the throttle linkage bracket is not strong enough to return to idle.. any ideas? can it be adjusted?
#15
SA all the Way!
Originally posted by RotorMotorDriver
Get a stronger throttle return spring, haha. I actually dont know how to help ya, I just thought Id throw that out there as a posibility.
~T.J.
Get a stronger throttle return spring, haha. I actually dont know how to help ya, I just thought Id throw that out there as a posibility.
~T.J.
#16
Hunting Skylines
Join Date: Apr 2001
Location: Brisbane, Queensland, Australia.
Posts: 3,431
Likes: 0
Received 4 Likes
on
3 Posts
Originally posted by RotorMotorDriver
Get a stronger throttle return spring, haha. I actually dont know how to help ya, I just thought Id throw that out there as a posibility.
~T.J.
Get a stronger throttle return spring, haha. I actually dont know how to help ya, I just thought Id throw that out there as a posibility.
~T.J.
#17
Banned. I got OWNED!!!
the throttle return spring was hiding in the box!!!!!! i hate shipping popcorn!!!! it gets everywhere!!!!!! thanks tim!!! that bad boy will be smoking fools soon enough!!!p/s if you need that choke block off let me know!
#19
Full Member
Thread Starter
Join Date: May 2002
Location: Miinnesota
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Can anyone tell me if i need to have my dizzy hooked up to a vacum source when running a Weber? If so, where should i hook up the vacum? Also, what fuel pressure do most of you run?
#20
Seven Is Coming
iTrader: (1)
I heard 5 PSI from mazdatrix, and they sell them. As for the vacuum source, I dont know, but personally, I plan to just leave the dizzy open when I get mine, unless theres another better idea out there...*hint, hint*
~T.J.
EDIT: Nice sig man...Removed the spring for the secondaries on your Weber, eh?
~T.J.
EDIT: Nice sig man...Removed the spring for the secondaries on your Weber, eh?
Last edited by RotorMotorDriver; 02-18-03 at 12:06 AM.
#21
Hunting Skylines
Join Date: Apr 2001
Location: Brisbane, Queensland, Australia.
Posts: 3,431
Likes: 0
Received 4 Likes
on
3 Posts
Just leave the vacuum advance disconnected.. there's no need for it. It also helps to dial in a bit of extra timing. There's an article on Paul Yaw's website that shows a good way of doing it.
As for fuel pressure, Weber's like about 4.5psi.
As for fuel pressure, Weber's like about 4.5psi.
Last edited by REVHED; 02-18-03 at 12:41 AM.