uh oh??? i need help..
#1
uh oh??? i need help..
today i was getting my 85 GSL-SE ready for the new radiator that i got... being as the car is my first engine rebuild i and i stopped for 1 year and am just getting back to it i wanted to completely clear out the cooling system for the new stuff
well when i took off the water pump and saw a white film covering the cooling ports. well its more then just a film it's kinda thick. did I mess up on the rebuild and need to start all over now? or is this just from the car sitting for a year with a full cooling system. here is 2 pix of the "film" please help
well when i took off the water pump and saw a white film covering the cooling ports. well its more then just a film it's kinda thick. did I mess up on the rebuild and need to start all over now? or is this just from the car sitting for a year with a full cooling system. here is 2 pix of the "film" please help
#7
I can has a Hemi? Yes...
iTrader: (2)
Run a Water and Degreaser mix in the cooling system for about 10-15 minutes
Then rinse with fresh water for another 10-15 minutes.
Then replace the fresh water one more time, and run for 10-15 minutes, all should be clear.
Then replace with the appropriate 50/50 distilled water and coolant.
Good Luck!
Then rinse with fresh water for another 10-15 minutes.
Then replace the fresh water one more time, and run for 10-15 minutes, all should be clear.
Then replace with the appropriate 50/50 distilled water and coolant.
Good Luck!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
veilside123
3rd Generation Specific (1993-2002)
1
10-20-02 01:37 PM