Trailing Timing Out 100 Degrees???
12-03-06 | 03:37 AM
#1
Thread Starter
Newbie
Joined: Sep 2003
Posts: 4
Likes: 0
From: Under the 1200
Trailing Timing Out 100 Degrees???
Hey all,
I just installed DLIDFIS on my 13b EP and was setting my timing to Fully advanced 20deg BTDC for leading and 10Deg BTDC for trailing.
I went ahead and done the leading first, then when it came to trailing i noticed it was wayyy out, around 100 degrees or so, and adjusting the trailing timing with the pot on the side of the dizzy only brings it about 10 degrees closer. so how can i bring it Right up back to where i need it. On leading plugs i know how to fix that but on trailing i have no idea!
Thanks
Chris
I just installed DLIDFIS on my 13b EP and was setting my timing to Fully advanced 20deg BTDC for leading and 10Deg BTDC for trailing.
I went ahead and done the leading first, then when it came to trailing i noticed it was wayyy out, around 100 degrees or so, and adjusting the trailing timing with the pot on the side of the dizzy only brings it about 10 degrees closer. so how can i bring it Right up back to where i need it. On leading plugs i know how to fix that but on trailing i have no idea!
Thanks
Chris
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
Engine Management Forum
11
11-09-15 01:15 PM
