TII Tranny
10-10-02, 07:36 PM
#2
Old [Sch|F]ool
if you have an '80 then it's an SA 
The transmission will physically bolt up to the engine. They make a clutch disk that adapts an N/A sized clutch to the T2 input splines, but I do not know/believe that the T2 starter would mate with the N/A flywheel.
This leaves a few options... either hunt down a '74-78 bellhousing and starter and bolt the T2 transmission to that, using the N/A flywheel and adapter clutch disk, or
get a counterweight for a '79-82 automatic 12A, a T2 lightweight flywheel, and a T2 clutch.
The transmission will physically bolt up to the engine. They make a clutch disk that adapts an N/A sized clutch to the T2 input splines, but I do not know/believe that the T2 starter would mate with the N/A flywheel.
This leaves a few options... either hunt down a '74-78 bellhousing and starter and bolt the T2 transmission to that, using the N/A flywheel and adapter clutch disk, or
get a counterweight for a '79-82 automatic 12A, a T2 lightweight flywheel, and a T2 clutch.
10-10-02, 07:43 PM
#3
I Post In The Nude
Thread Starter
Join Date: Feb 2002
Location: College Station
Posts: 1,289
Likes: 0
Received 0 Likes
on
0 Posts
sweet, thanks peejay
Im trying to plan how im going to do everything for the car im rebuilding. I appreciate your help and im sure youll notice quite a few questions coming from my direction in the near future
Im trying to plan how im going to do everything for the car im rebuilding. I appreciate your help and im sure youll notice quite a few questions coming from my direction in the near future
Thread
Thread Starter
Forum
Replies
Last Post