TII swap into GSL-SE
#1
I HATE sleepy eyes
Thread Starter
Join Date: Nov 2001
Location: Birmingham, AL
Posts: 1,180
Likes: 0
Received 0 Likes
on
0 Posts
TII swap into GSL-SE
my friend has an 84 SE and wants to put a JSpec 13BT in it. we were wondering, aside from the engine, what will he need to make it a success? id search but its down. thanks
#4
smog nazi destroyer
i am not sure, but i would imagine that you would want the tranny too. and ofcourse the alternator, wiring harness, and either the tII ignition or some aftermarket one.
Trending Topics
#8
I can has a Hemi? Yes...
iTrader: (2)
Originally posted by peejay
eddie the engine might fit peachy-keen with the 1st-gen front cover and oil pan but you'll need to use the T2 transmission...
eddie the engine might fit peachy-keen with the 1st-gen front cover and oil pan but you'll need to use the T2 transmission...
You can use the SE tranny (or even 12A Tranny) with a lightweight TII Racing Beat Flywheel and the TII counterweight.
#10
Find Racing
Join Date: May 2001
Location: Seattle, WA
Posts: 1,219
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by peejay
You could, just stock them like cordwood in the garage and plan to get good at changing them...
You could, just stock them like cordwood in the garage and plan to get good at changing them...
Oh yeah, about the TII swap, have fun with the wiring
#12
Senior Member
Join Date: Aug 2001
Location: Bloomington, MN
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
Click my car below.
I'm just getting ready to start putting things back together now.
More info is available at these fine sites, brought to you by insane rotary fans all over.
http://www.geocities.com/chris32472/
http://groups.yahoo.com/group/turbof...portRows&tbl=2
http://groups.yahoo.com/group/turbofb/
http://turbo1stgen.rx-7.org/
MODS:Could we make this a sticky and let the other turbo 1st gen guys pile information here? This thread seems to be coming up quite a lot lately...
Thanks,
I'm just getting ready to start putting things back together now.
More info is available at these fine sites, brought to you by insane rotary fans all over.
http://www.geocities.com/chris32472/
http://groups.yahoo.com/group/turbof...portRows&tbl=2
http://groups.yahoo.com/group/turbofb/
http://turbo1stgen.rx-7.org/
MODS:Could we make this a sticky and let the other turbo 1st gen guys pile information here? This thread seems to be coming up quite a lot lately...
Thanks,
#13
I can has a Hemi? Yes...
iTrader: (2)
Well, after doing lots of research for my Turbo First Gen project, Let me put put some good Turbo 1st Gen Links up..
If I forgot some, Feel free to add more! If I duplicated some previously posted, then I am sorry.
David Lane's GSL-SE Turbo
David Randall's GSL-SE Turbo
http://www.fastrotor.com/tens.htm
Turbo II into first Gen with Factory ECU
TurboFB's (Chris) TII with Facttoy ECU into 1st Gen
Berny Hererra's Turbo Limited Edition
Mariah's page on Benny's Turbo first Gen
http://my.engr.ucdavis.edu/~pko/Projects.html
Andrew's 12A turbo
ITZweapon's Custom Turbo GSL-SE
Romeo's Turbo GSL-SE
Romeo's shop and info.
Ty Henrique's Turbo GSL-SE (Beautiful Body Kit)
The Hitman's NOT 20B 3 Rotor Turbo
Mazda Rotary Car Club of Florida - Good Info
http://members.aol.com/_ht_a/mcgyver84/RX-7.html
Paul's 2nd Gen 13B into a first Gen with ECU (related)
Frank Muniz's Widebody Turbo first Gen
AJC13B's Turbo Series III powerhouse
Jim Linnihan's NOTA V6 - Turbo GSL-SE
http://www.geocities.com/MotorCity/S...otlight_2.html
http://www.geocities.com/motorcity/speedway/9116/index.html - Kinda OLD
Propane Powered Turbo first Gen
Mazda Racing - supposedly offer's Turnkey packages
Adsy's 12 A Turbo
Awesome 12A Turbo
1983 Mariah Widebody Turbo
Miscellaneous Turbo and Fuel Injected 1st Gen's
ECU - Motec
ECU - SDS - Simple Digital Systems
ECU - Wolf3D
ECU - Haltech
Intercooler ID Page - to figure out what you need.
2nd Gen Oil Coolers on a 1st Gen (might be needed)
RX-7 Forum Thread on putting a TII Tranny into a 1st Gen (important)
J-Spec Importers - http://www.corksport.com/
J-Spec Importers - C & T international
J-Spec Importers - FC3s.org
J-Spec Importers - Nippon Motors.com
J-Spec Importers - Jap Perfomance.com (half-cut cars too)
That should be enough to keep you reading for a while. Good luck, and post related info here!
FOR Turbo First Gens conversion Info
TURBO FB DATABASE
NEW SITE ADDED! - 4/27/02
SA RX-7 (first gen) with 13B Turbo HOW TO AND DIARY
If I forgot some, Feel free to add more! If I duplicated some previously posted, then I am sorry.
David Lane's GSL-SE Turbo
David Randall's GSL-SE Turbo
http://www.fastrotor.com/tens.htm
Turbo II into first Gen with Factory ECU
TurboFB's (Chris) TII with Facttoy ECU into 1st Gen
Berny Hererra's Turbo Limited Edition
Mariah's page on Benny's Turbo first Gen
http://my.engr.ucdavis.edu/~pko/Projects.html
Andrew's 12A turbo
ITZweapon's Custom Turbo GSL-SE
Romeo's Turbo GSL-SE
Romeo's shop and info.
Ty Henrique's Turbo GSL-SE (Beautiful Body Kit)
The Hitman's NOT 20B 3 Rotor Turbo
Mazda Rotary Car Club of Florida - Good Info
http://members.aol.com/_ht_a/mcgyver84/RX-7.html
Paul's 2nd Gen 13B into a first Gen with ECU (related)
Frank Muniz's Widebody Turbo first Gen
AJC13B's Turbo Series III powerhouse
Jim Linnihan's NOTA V6 - Turbo GSL-SE
http://www.geocities.com/MotorCity/S...otlight_2.html
http://www.geocities.com/motorcity/speedway/9116/index.html - Kinda OLD
Propane Powered Turbo first Gen
Mazda Racing - supposedly offer's Turnkey packages
Adsy's 12 A Turbo
Awesome 12A Turbo
1983 Mariah Widebody Turbo
Miscellaneous Turbo and Fuel Injected 1st Gen's
ECU - Motec
ECU - SDS - Simple Digital Systems
ECU - Wolf3D
ECU - Haltech
Intercooler ID Page - to figure out what you need.
2nd Gen Oil Coolers on a 1st Gen (might be needed)
RX-7 Forum Thread on putting a TII Tranny into a 1st Gen (important)
J-Spec Importers - http://www.corksport.com/
J-Spec Importers - C & T international
J-Spec Importers - FC3s.org
J-Spec Importers - Nippon Motors.com
J-Spec Importers - Jap Perfomance.com (half-cut cars too)
That should be enough to keep you reading for a while. Good luck, and post related info here!
FOR Turbo First Gens conversion Info
TURBO FB DATABASE
NEW SITE ADDED! - 4/27/02
SA RX-7 (first gen) with 13B Turbo HOW TO AND DIARY
Last edited by Directfreak; 04-27-02 at 10:01 PM.
#15
I can has a Hemi? Yes...
iTrader: (2)
Originally posted by MIKE-P-28
Ok now I see why its a sticky... A day late and a dollar short for me.. I could have used thise links a week back
Ok now I see why its a sticky... A day late and a dollar short for me.. I could have used thise links a week back
I have been doing homework on this pretty aggressively for the past few months.
Hey, at least we can all benefit from it, and help each other that much more .
#16
Senior Member
Join Date: Aug 2001
Location: Bloomington, MN
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Directfreak
Hey, at least we can all benefit from it, and help each other that much more .
Hey, at least we can all benefit from it, and help each other that much more .
#17
Driven a turbo FB lately?
iTrader: (1)
Originally posted by NOTA V6
Amen! We need not only to keep these old beasts in good shape and on the road, but also able to leap tall 3rd gens in a single bound.
Amen! We need not only to keep these old beasts in good shape and on the road, but also able to leap tall 3rd gens in a single bound.
#20
BOOSTEDROTORS.. I did the swap with no problem it went in like a glove , My car is a 1984 GSL i have a 88 Turbo II J-SPEC engine in it from Corksport me and couple friends rebuilt and Streetported, chromed out the housings painted it gloss black had the whole engine bay painted gun metallic silver people love it everything pretty much goes in straight with the Turbo II tranny, just have to make a custom drive shaft and you better work on the rear end becouse i have another friend who did the 93 swap into a GSL-SE he broke the rear end it's alot of power but at the end people admire it when they see it, also good luck finding people who can re-wire it, i would just get the haltech also don't throw any 12A parts they are usefull.
Jaan M.
SilverboyRacing
1984 Mazda RX7
"88" Turbo II Motor j-spec
Jaan M.
SilverboyRacing
1984 Mazda RX7
"88" Turbo II Motor j-spec
#21
nice thread guys, i geuss ill add my lame photo link hehe www.photopoint.com visit rx7power then album *** some nice pics of where my rx7 is sitting
#22
Full Member
Join Date: Mar 2002
Location: Coral Springs
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Great Linkz.. ()utstanding!!!
br0.. great links..even though I have most of them..I think posting them was a great idea. I just notice how few turbocharged 1st gens there are out there. I've searched the internet for years but found only a handfull.
On a sidenote.. a friend of mines.. asked me to make him some clear tail lights for his 1st gen. If you guyz like.. I'll post the steps. The clear tail lights.. and a set of LED bulbs.. should give the back of the 1st genz a updated look.
On a sidenote.. a friend of mines.. asked me to make him some clear tail lights for his 1st gen. If you guyz like.. I'll post the steps. The clear tail lights.. and a set of LED bulbs.. should give the back of the 1st genz a updated look.
#23
Punk Ass Bitch
Join Date: Dec 2003
Location: Welland, Ontario
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Anyone want a great attitude booster?! Go to Mazdaracing.com. If you go to the Videos section, there's a Carburated 12a 1st gen RX-7 beating the snot out of a Nova with a 302 and a brand-new mustang, with plenty of mods done to both!
I'm not endorsing street racing by showing these video's but it pretty damn cool. And the RX-7 kicks ***! You can see the horns from the carb sticking out of the hood.
I'm not endorsing street racing by showing these video's but it pretty damn cool. And the RX-7 kicks ***! You can see the horns from the carb sticking out of the hood.
#24
Junior Member
Join Date: Apr 2002
Location: Australia
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
I recently dropped a Series 5 13B Turbo in my Series 2 and used:
1990 13B Turbo
Turbo 5-speed
Modified Tailshaft
13B series 2 crossmember
pre-pump, surge-tank, return-lines, high-flow fuelpump
Microtech MTX-8 Computer
Turbo_smart Boost Controller
Turbo_smart Type 3 BOV
frontmount intercooler with 2.5" SS piping
3" Mandrel-bent exhaust with SS turbosmart muffler
3" high-flow cat
plasma-cut plate for mouth of turbo/wastegate
1990 13B Turbo
Turbo 5-speed
Modified Tailshaft
13B series 2 crossmember
pre-pump, surge-tank, return-lines, high-flow fuelpump
Microtech MTX-8 Computer
Turbo_smart Boost Controller
Turbo_smart Type 3 BOV
frontmount intercooler with 2.5" SS piping
3" Mandrel-bent exhaust with SS turbosmart muffler
3" high-flow cat
plasma-cut plate for mouth of turbo/wastegate