TB Mod. What to remove
#1
TB Mod. What to remove
Guys,
I'm doing a TB mod on my spare TB. I run full emissions but will be removing my ACV since I will be running a Full To4B.
What can I take of the TB without effecting Idle and Driveability??
there is the whole wax idle thing that is connected to the first throttle plates. Do I need this since I'm removing the first throttle plates?? It looks like it holds Idle and also and Idle stop. From the picture I have seen it looks like it was removed.
thanks
Ian
I'm doing a TB mod on my spare TB. I run full emissions but will be removing my ACV since I will be running a Full To4B.
What can I take of the TB without effecting Idle and Driveability??
there is the whole wax idle thing that is connected to the first throttle plates. Do I need this since I'm removing the first throttle plates?? It looks like it holds Idle and also and Idle stop. From the picture I have seen it looks like it was removed.
thanks
Ian
#2
I did it a long time ago but from what i remeber everything connected to those plates can be pretty much removed since its of no use anymore. Only thing i've noticed about the TB mod is that when the car is warming up you've gotta keep your foot on the gas or it will die. But once its warmed up, Everything is back to normal.
Hope this was of some help. BTW i did it following the method for a 2nd gen.
Hope this was of some help. BTW i did it following the method for a 2nd gen.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Erosangel
3rd Generation Specific (1993-2002)
5
09-18-15 04:06 PM