t70 in a first gen........
#7
Senior Member
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Join Date: Jun 2002
Location: S.A. Texas/Tokyo Japan
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
knight1976
Thanks for posting the pic for me. one day I will learn how to.
12aPwr
The turbo is a few inches frome the frame. Look on the back of the motor, there is a home made torque brace. If you look real close, on the driver side motor mount there is a chain holding the motor down. You can only see a very small part of the chain. The chain goes over the motor mount to the cross member. I also welded the trans mount to the trans mount cross menber.
Gonzz
Made the manifold myself. If I can help you out in anyway let me know.
Thanks for the nice words, chuck
Thanks for posting the pic for me. one day I will learn how to.
12aPwr
The turbo is a few inches frome the frame. Look on the back of the motor, there is a home made torque brace. If you look real close, on the driver side motor mount there is a chain holding the motor down. You can only see a very small part of the chain. The chain goes over the motor mount to the cross member. I also welded the trans mount to the trans mount cross menber.
Gonzz
Made the manifold myself. If I can help you out in anyway let me know.
Thanks for the nice words, chuck
Trending Topics
#9
Daily Domestic Killer
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Join Date: Mar 2001
Location: San Antonio, Tx, USA
Posts: 2,425
Likes: 0
Received 0 Likes
on
0 Posts
Hey Chuck how did you get the aluminum so clean on your engine...
btw I bet you could just run your car with the turbo and nothing else, jet propulsion
btw I bet you could just run your car with the turbo and nothing else, jet propulsion
![Cool](https://www.rx7club.com/images/smilies/cool.gif)
#10
Rotary Enthusiast
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Thread Starter
Join Date: Apr 2002
Location: Cibolo, TX
Posts: 1,477
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by chuck8313BTSDS
knight1976
Thanks for posting the pic for me. one day I will learn how to.
knight1976
Thanks for posting the pic for me. one day I will learn how to.
Thread
Thread Starter
Forum
Replies
Last Post