nick812

Ok i did a search I think I can do it. I called to try and find a hub adaptor and none of them had them or could even order them. So where do i need to go to get 1? The steering wheel i have been looking at is 1 off ebay. Let me know if it is ok to buy it and if anyone has it installed show some pics. Thanks Nick

dj55b

iTrader: (2)

there are hub adapter for the first gen on ebay.... and if i recall correctly one of the miata generations uses the exact same hub. hope that helps

nick812

all the 1's i see on ebay is for 86 up but i thought i read some where that the 84-85 as the 86-91 but not by what the auto shops say. Thats why i am asking.

JKM

The second gen hubs will work, it is exactly the same. I have one of the cheap ebay hubs myself, it works fine.

nick812

ok kool 1 of the wheels i have been thinking about comes with a 2nd gen. hub.

GSL12a85

The 2nd gen hubs work on a 1st gen??

Damn, shoulda told me.. I was looking for a 1st gen hub for ages.. finally found one and got it for like $40..

Its not a cheap one.. Its a 1st gen rx7 and miata Nardi hub, and its on its way over

nick812

I have been looking for 1 for the first gen. no luck but awhile back i thought i read some where that the 2nd gen was the same. Is the 3rd gen the same also? Just seen another wheel i like but its for the 3rd gen. Thanks every1 and does any 1 have pic's of there aftermarket steering wheels installed?

GSL12a85

http://cgi.ebay.com/ebaymotors/MAZDA...35735622QQrdZ1
Theres a 1st gen hub

nick812

I was looking and didn t see that O well if a 2nd gen will work ill get the wheel that comes with the hub.