Starter help
06-30-07, 05:50 PM
#1
oonce oonce
Thread Starter
Starter help
Can i get a picture of the 12a starter wired up.
how i have it now is the upper stud is straight to le battery the lower stud is going to the harness, and the sidepin is going into the same harness.
how i have it now is the upper stud is straight to le battery the lower stud is going to the harness, and the sidepin is going into the same harness.
07-01-07, 01:08 AM
#2
Too old to act my age
Join Date: Feb 2005
Location: Tulsa, Ok.
Posts: 3,164
Likes: 0
Received 0 Likes
on
0 Posts
Starter wiring is simple. The positive battery cable hooks to the large post that does not have the wire going inside the starter. Negative bolts to the block, usually thru the top starter bolt, or a bellhousing bolt.
The slide terminal gets a black wire with a whitish-yellow stripe and a plastic terminal.
That *should* be all the wires for the starter. Any other wires attached to the starter, were not placed there by Mazda.
The slide terminal gets a black wire with a whitish-yellow stripe and a plastic terminal.
That *should* be all the wires for the starter. Any other wires attached to the starter, were not placed there by Mazda.
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM